Wastewater Temperature Monitoring | Fluidquip ...
In Final Effluent many discharge consents are waived when the temperature reaches a low level of around 4ºC and by using a verifiable temperature measurement device such as the WaterTechw² D062 the operator can avoid issues with regulators.
In activated sludge the ability of the process to treat the effluent is greatly effected by temperature, the bugs present in the process eat more and reproduce more when the temperature increases. It is estimated that every 10° C increase in temperature doubles the bug reproduction rate up to a limiting maximum, with optimum efficiency being between 10° and 40°. The more bugs that are present the more Dissolved Oxygen is required.
Products available:
The WaterTechw² D062 Sensor has been specifically designed to monitor temperature in wastewater and industrial effluent treatment applications. The result is a robust, accurate, easy to use and stable temperature measurement system. The sensors are filled with a special cast resin that protects against moisture. As standard, the sensors are fitted with 10 metre cable, but they can be supplied with other lengths on request.
The sensor within the probes consists of a metal cylinder containing the thermistor network. This sensor tip is fitted to a black plastic housing. The sensors are designed for use between -5ºC and +45º. The accuracy of the measurement is +/- 0.2ºC. The sensor requires very little maintenance, with no special tools or training required. The sensor has been factory calibrated so does not require further calibration, however a verification process is available to ensure that the system is reading accurately.
These sensors have been specifically designed to monitor temperature in wastewater and industrial effluent treatment applications. The result is a robust, accurate, easy to use and stable temperature measurement system. The sensors are filled with a special cast resin that protects against moisture.
D062 – Blind Transmitter – 4-20mA loop powered
D063 – Blind Transmitter – PT100 4-wire connection
The sensor within the probes consists of a metal cylinder containing the thermistor network. This sensor tip is fitted to a black plastic housing. The sensors are designed for use between -5ºC and +45º. The accuracy of the measurement is +/- 0.2ºC. The sensor requires very little maintenance, with no special tools or training required. The sensor has been factory calibrated so does not require further calibration, however a verification process is available to ensure that the system is reading accurately.
The 7300w² Monitor is designed to interface with all of the sensors in the Partech WaterWatch² range. The monitor specification provides all the connections required for 1 or 2 sensors, systems can be created by the use of expansion boxes to include multiple sensors. The maximum number of sensors will be limited by the practicalities of most sites. We anticipate 8 being a sensible maximum although many more can be accommodated.
Combining sensors provides a very cost effective way of simultaneously monitoring parameters such as dissolved oxygen and suspended solids in an activated sludge plant, or pH and turbidity at a treatment works outfall where the sensors can be located close together.
To contact Fluidquip Australia about Wastewater Temperature Monitoring | Fluidquip use Get a quote.
In Final Effluent many discharge consents are waived when the temperature reaches a low level of around 4ºC and by using a verifiable temperature measurement device such as the WaterTechw² D062 the operator can avoid issues with regulators.
In activated sludge the ability of the process to treat the effluent is greatly effected by temperature, the bugs present in the process eat more and reproduce more when the temperature increases. It is estimated that every 10° C increase in temperature doubles the bug reproduction rate up to a limiting maximum, with optimum efficiency being between 10° and 40°. The more bugs that are present the more Dissolved Oxygen is required.
Products available:
The WaterTechw² D062 Sensor has been specifically designed to monitor temperature in wastewater and industrial effluent treatment applications. The result is a robust, accurate, easy to use and stable temperature measurement system. The sensors are filled with a special cast resin that protects against moisture. As standard, the sensors are fitted with 10 metre cable, but they can be supplied with other lengths on request.
The sensor within the probes consists of a metal cylinder containing the thermistor network. This sensor tip is fitted to a black plastic housing. The sensors are designed for use between -5ºC and +45º. The accuracy of the measurement is +/- 0.2ºC. The sensor requires very little maintenance, with no special tools or training required. The sensor has been factory calibrated so does not require further calibration, however a verification process is available to ensure that the system is reading accurately.
These sensors have been specifically designed to monitor temperature in wastewater and industrial effluent treatment applications. The result is a robust, accurate, easy to use and stable temperature measurement system. The sensors are filled with a special cast resin that protects against moisture.
D062 – Blind Transmitter – 4-20mA loop powered
D063 – Blind Transmitter – PT100 4-wire connection
The sensor within the probes consists of a metal cylinder containing the thermistor network. This sensor tip is fitted to a black plastic housing. The sensors are designed for use between -5ºC and +45º. The accuracy of the measurement is +/- 0.2ºC. The sensor requires very little maintenance, with no special tools or training required. The sensor has been factory calibrated so does not require further calibration, however a verification process is available to ensure that the system is reading accurately.
The 7300w² Monitor is designed to interface with all of the sensors in the Partech WaterWatch² range. The monitor specification provides all the connections required for 1 or 2 sensors, systems can be created by the use of expansion boxes to include multiple sensors. The maximum number of sensors will be limited by the practicalities of most sites. We anticipate 8 being a sensible maximum although many more can be accommodated.
Combining sensors provides a very cost effective way of simultaneously monitoring parameters such as dissolved oxygen and suspended solids in an activated sludge plant, or pH and turbidity at a treatment works outfall where the sensors can be located close together.
To contact Fluidquip Australia about Wastewater Temperature Monitoring | Fluidquip use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product