FMC Conveyor Idlers - Series FMC C3000 ...

FMC - Conveyor Idlers - Series FMC C3000 Regreaseable Idlers

Supplier: Tekforce Engineering

FMC Conveyor idlers for process plants

FMC C3000 Idler types

FMC C3000 Return Idler types

Series C3000 Regreaseable Idlers

The Link-Belt® Series C3000 Idler is a rugged roller supplied with lubrication fittings for ease in field regreasing from either side of the conveyor.

Call for more details

The Link-Belt Series C3000 conveyor-Idler line features factory lubricated trough rolls supplied with lubrication fittings at both ends of the idlers for ease in field regreasing from either side of the conveyor.

The Series C3000 idler load ratings exceed CEMA requirements and are designed for continuous material handling operations moving large volumes of tough, abrasive materials such as coal, iron ore, copper, rock products, chemicals and forestry products.

Complete line of C3000 Series idlers includes 450mm to 1500mm belt width, 20, 35 and 45 degree 3 roll troughed, training, impact and return idlers, as well as many specially designed products to suit every material handling requirement.

The C3000S rollers and frames are protected from corrosion by a polymeric powder coating (Corvel Gray) which is applied following a five-stage phosphate cleaning operation.

The finish is then baked on at high temperatures to provide resistance to abrasive elements. Assembly hardware is electro-zInc plated to ensure extended service.

The Series C3000 idler rollers, available in both 127mm and 152mm diameters, feature an exclusive, full-length center tube which is assembled to precision die-formed heads that are recessed into hot rolled mechanical shells.

The entire unit is then continuously welded robotically, thus ensuring an integral, airgitht unit in which contaminants and corrosion cannot enter.

The exclusive Delrin triple horizontal labyrinth outer seal protects the precision tapered roller bearings in several ways.

The outer deflector cap (flinger) features a 90 degree coutoured lip to deflect material away from the roll ends.

Triple horizontal, grease filled labyrinths and Grade F1 felt contact primary seals, ensure against the ingress of performance inhibiting contaminants.

Additional protection of the idler bearings is assured by the greasefilled center tube and grease through lubrication.

Each three roll troughed idler is equipped with a standard grease fitting at each end, along with polypropylene shaft connectors between the center and end rolls for single point positive greasing.

Tekforce can provide further catalogue information for the complete FMC Model numbers, overall dimensions, and unit weight for the Link-Belt C3000 Series Belt Conveyor Idler Line.

To Know More about Series C3000 Regreaseable Idlers Please click here

To contact Tekforce Engineering about FMC Conveyor Idlers - Series FMC C3000 Regreaseable Idlers use Get a quote.