Yilmaz Aluminium Upcut Mitre Saw | ACK700 ...
Introducing the “New” ACK700S Large Capacity Aluminium Mitre Saw! The New ACK700S has one of the largest cutting capacity in it’s class. With it’s 700mm Aluminium blade and powerful 3KW (4HP) motor it can accurately perform straight cuts, 45º mitres and more extreme angles of up to 75º in either direction (Left & Right). The 700mm blade stroke is controlled by a sturdy Hydro-Pneumatic (air over oil) feed cylinder mounted on two linear rods, the feed rate of the blade can be adjusted via a turn knob on the front of the machine. To start the cutting action the operator presses two separate buttons on the front control panel, this means that both hands have to used which increases safety for the operator.
Key Features
The ACK700 incorporates a fully enclosed safety hood which is controlled via a pneumatic cylinder to open and close and an LED light system is used inside the hood to improve visibility when cutting. Profiles are held in place when cutting by 3 pneumatic clamp cylinders and a spray-mist lubrication system is used to help cut quality and blade life.
Additional Features
Technical
ACK700 | |
---|---|
Motor KW | 4 KW |
Volt/Freq/Amp | 415v (3A+E) /50/15 |
Blade Diameter / Bore | 700mm / 38mm |
Spindle RPM | 3000 RPM |
Air Consumption | 60 Lt/minute |
Air Pressure | 6 Bar |
Air Connector | Nitto Male |
Table Height (mm) | 1000mm |
Machine Dimensions (mm) (Width x Depth x Height) |
1100 x 1380 x 1600mm |
Packing Dimensions (cm) (Length x Width x Height) |
130 x 110 x 166cm |
Net Weight (KG) | 500kg |
Gross Weight (KG) | 550kg |
To contact Luna Machinery about Yilmaz Aluminium Upcut Mitre Saw | ACK700 use Get a quote.
Introducing the “New” ACK700S Large Capacity Aluminium Mitre Saw! The New ACK700S has one of the largest cutting capacity in it’s class. With it’s 700mm Aluminium blade and powerful 3KW (4HP) motor it can accurately perform straight cuts, 45º mitres and more extreme angles of up to 75º in either direction (Left & Right). The 700mm blade stroke is controlled by a sturdy Hydro-Pneumatic (air over oil) feed cylinder mounted on two linear rods, the feed rate of the blade can be adjusted via a turn knob on the front of the machine. To start the cutting action the operator presses two separate buttons on the front control panel, this means that both hands have to used which increases safety for the operator.
Key Features
The ACK700 incorporates a fully enclosed safety hood which is controlled via a pneumatic cylinder to open and close and an LED light system is used inside the hood to improve visibility when cutting. Profiles are held in place when cutting by 3 pneumatic clamp cylinders and a spray-mist lubrication system is used to help cut quality and blade life.
Additional Features
Technical
ACK700 | |
---|---|
Motor KW | 4 KW |
Volt/Freq/Amp | 415v (3A+E) /50/15 |
Blade Diameter / Bore | 700mm / 38mm |
Spindle RPM | 3000 RPM |
Air Consumption | 60 Lt/minute |
Air Pressure | 6 Bar |
Air Connector | Nitto Male |
Table Height (mm) | 1000mm |
Machine Dimensions (mm) (Width x Depth x Height) |
1100 x 1380 x 1600mm |
Packing Dimensions (cm) (Length x Width x Height) |
130 x 110 x 166cm |
Net Weight (KG) | 500kg |
Gross Weight (KG) | 550kg |
To contact Luna Machinery about Yilmaz Aluminium Upcut Mitre Saw | ACK700 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product