Sense IoT Pressure Meter 300 PSIG

Sense IoT - Pressure Meter 300 PSIG

Supplier: Sense IoT

Pressure Meter 300 PSIG

The Sense IoT wireless pressure sensor measures pressure from a 5 volt pressure transducer and transmits the pressure measurement to the Sense IoT portal.

16 Recent Views In Stock

This solution combines a standard pressure transducer interfaced to a Sense IoT wireless radio. • Measure pressure with 50 or 300 PSIG transducers (others available upon request). • Measure non-caustic liquid or vapor pressures. • Pressure transducer is NEMA 4X (IP66), CE rated. By connecting the Sense IoT wireless pressure sensor to a pressurized gas, liquid or vapor supply line, it can measure the pressure within the line and send data to the Sense IoT Online Sensor Monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph. User customization allows you to set notifications and alerts from the system so you can know immediately if pressure is above or below an optimal range.

What's in the box?

Wireless Sensor
Mounting Hardware
2 x AA Batteries

Suggested Applications

Compressors/ Compressed air supply lines
Water supply lines
Gas supply lines
Pumping systems
Irrigation system pressure
Industrial process monitoring
Trash compaction equipment
Many additional applications

Pressure Transducer Specifications

Operating Temperature: -18 to 79°C
Thermal Effect on Reading: ±0.02% FS/°F. (includes zero and span)
Media: Gas, Liquid or Vapor
Response Time: 300 msec
Stability: 1.0% FS/year (Typ.)
Wire Length: 1 Meter shielded cable (between gauge and wireless unit)
Accuracy: 1.0% FS; 0.5% RSS; (Includes linearity, hysteresis, and repeatability)
Input Voltage: 0-15 V
Voltage Measurement Range: 0-5.2 V
Voltage Measurement Resolution: ~0.5 mV
Voltage Measurement Accuracy: ± (2% of reading + 1.5 mV)
Pressure Measurement Range: ± (2% of reading + 1.05% FS)
User Calibrated Accuracy: +/- 1% FS
Process Connection: ¼" NPT-Male Standard
Pressure Transducer(s): 50 or 300 PSIG (Others available upon request)
Weight: 292 grams

Variation Specifications

Security: Encrypt-RF® (256-bit key exchange and AES-128 CTR)
Max Output Voltage: 5.5 V
User Calibrated Pressure Accuracy: ± (0.5% of reading + 0.5% FS)
Pressure Measurement Accuracy: ± (2% of reading + 1.05% FS)

433 MHz Specifications

Operating Frequency: 433 MHz Operating Frequency
Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
Device Range: Devices range up to 350m non-line-of-sight, wireless device range*
Security: Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)

To contact Sense IoT about Sense IoT Pressure Meter 300 PSIG use Get a quote.