Quality in Control P/L OEM Controller | ...

Quality in Control P/L - OEM Controller | MR340-0

OEM Controller | MR340-0

The MR340-0 PCB Controller enables Original Equipment Manufacturers (OEMs) to compactly and cost effectively integrate MR34X series Fber Optic Incremental Encoders within their own equipment designs.

In Stock

In operation, the MR340-0 Controller sends two optical wavelength signals to a remote MR34X series Sensor. The encoder then modulates each optical beam based on the direction with a leading or lagging phase shift.

The return optical signals are split into two separate beams and converted back into electrical signals by two photodiodes whose outputs are amplified by two gain-controlled amplifiers. A microprocessor supervises the amplitude of the optical signals and constantly adjusts the signal to provide a stable quadrature output.

The system has built-in diagnostics and can signal any anomaly occurring during sensor operation.

Specifications:

Electrical Interface
Connector	16-pin ribbon cable receptacle, 3M N2516-5002-RB Recommended mating plug, 3M 89116-0103
Quadrature Outputs	A+/A-/B+/B- RS422 line driver outputs, 100 kHz maximum bandwidth
Discrete Signals	ZERO Input, STATUS out, 5V logic
Serial Interface	Modbus RTU or RS422/485 compatible, User settable baudrate: 9,600 to 115,200 Byte format: 1 Start Bit, 8 Data Bits, 1 Stop Bit, No Parity
Power Supply	+5 VDC, 55mA typical, 100mA maximum Recommend 100mA power supply

To contact Quality in Control P/L about Quality in Control P/L OEM Controller | MR340-0 use Get a quote.

The system has built-in diagnostics and can signal any anomaly occurring during sensor operation.

Specifications:

Electrical Interface
Connector	16-pin ribbon cable receptacle, 3M N2516-5002-RB Recommended mating plug, 3M 89116-0103
Quadrature Outputs	A+/A-/B+/B- RS422 line driver outputs, 100 kHz maximum bandwidth
Discrete Signals	ZERO Input, STATUS out, 5V logic
Serial Interface	Modbus RTU or RS422/485 compatible, User settable baudrate: 9,600 to 115,200 Byte format: 1 Start Bit, 8 Data Bits, 1 Stop Bit, No Parity
Power Supply	+5 VDC, 55mA typical, 100mA maximum Recommend 100mA power supply

Read less...

To contact Quality in Control P/L about Quality in Control P/L OEM Controller | MR340-0 use Get a quote.

Let Quality in Control P/L provide you with a quote

Supplier

Get a quote

Supplier: Quality in Control P/L

Distribution: Australia, New Zealand, Asia Pacific Only

Location: Springbrook, QLD

Customers: Liberty OneSteel , BHP, Mitsubishi, Visi-Pak

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Quality in Control P/L are also proudly displaying these credentials:

Established:

1996

Employees:

1-5

Customers:

Liberty OneSteel , BHP, Mitsubishi, Visi-Pak

Certifications:

CE, UL Certifications

Distribution:

Australia, New Zealand, Asia Pacific Only

Location:

Springbrook , QLD