Liquip Victoria AdBlue Storage Tanks – ...

Liquip Victoria - AdBlue Storage Tanks – Self Bunded

Supplier: Liquip Victoria

AdBlue Storage Tanks – Self Bunded

In Stock

When you’re looking to safely store and dispense AdBlue Liquip Victoria can assist with a cost-effective, custom designed, certified Self Bunded Tank solution.

Our Standard SBTs range in size from 3,000 L to 20,000 L (safe fill levels). Although AdBlue is a clear, non-toxic and safe to handle liquid solution, it is highly corrosive, so it must be stored and transported carefully. Our main range of storage solutions take this risk into account and are manufactured with a 40 mm insulated Stainless Steel internal tank to ensure a consistent internal temperature and to prevent against contamination with other products and the environment.

Self Bunded AdBlue Tank Features

High quality steel outer tank shell, primed and painted with 2 coat marine grade epoxy (260 um minimum coat finish)
Stainless Steel internal tank with hatch with 2 inch and 3 inch ports
40mm of insulation between the two tank walls to assist in controlling and stabilising the AdBlues temperature.
Front door access, with high quality heavy duty container locking bars
Stainless steel suction and fill line piping
2 inch Stainless Steel Drybreak Adaptor fitted to fill line
2 inch Stainless Steel Y-Strainer fitted to suction line
Pump (Dependent on number of dispensers)
Stainless Steel Overfill Valve
Stainless Steel Anti-syphon Valve
Grate mesh floor in pump bay section
Manway on top to access internal Stainless Steel tank.
Lifting lugs on roof for easy movement
Forklift access points for safe lifting and movement
Side access panels for remote pipe connections
Optional level gauge and sump sensor

Fitting Options

Pumps (Dependent on number of dispensers. Please contact Liquip Victoria for more advice on pumps and dispensing systems)

Certifications

AS1692-2006 Steel tanks for Flammable & Combustible Liquids
AS1940-2004 The storage and handling of Flammable & Combustible Liquids
Above ground Storage Tanks for Petroleum products

To contact Liquip Victoria about Liquip Victoria AdBlue Storage Tanks – Self Bunded use Get a quote.

When you’re looking to safely store and dispense AdBlue Liquip Victoria can assist with a cost-effective, custom designed, certified Self Bunded Tank solution.

Self Bunded AdBlue Tank Features

High quality steel outer tank shell, primed and painted with 2 coat marine grade epoxy (260 um minimum coat finish)
Stainless Steel internal tank with hatch with 2 inch and 3 inch ports
40mm of insulation between the two tank walls to assist in controlling and stabilising the AdBlues temperature.
Front door access, with high quality heavy duty container locking bars
Stainless steel suction and fill line piping
2 inch Stainless Steel Drybreak Adaptor fitted to fill line
2 inch Stainless Steel Y-Strainer fitted to suction line
Pump (Dependent on number of dispensers)
Stainless Steel Overfill Valve
Stainless Steel Anti-syphon Valve
Grate mesh floor in pump bay section
Manway on top to access internal Stainless Steel tank.
Lifting lugs on roof for easy movement
Forklift access points for safe lifting and movement
Side access panels for remote pipe connections
Optional level gauge and sump sensor