Framecad Roll Formers | ST925iT
The ST925iT is an ideal solution for multi profile construction projects for mid-rise commercial, and residential buildings. Able to manufacture from 0.95 - 2.00 or 20 - 14 gauge, it is ideal for manufacturing wall frames, wide spanning roof trusses or long spanning floor joists.
Product Features:
Product Specifications:
ST925iT | |
---|---|
Profile Width (Web) | Range 3 1/2 - 12” or 89 - 305 mm |
Profile Height (Flange) | Between 1 1/3 - 2” or 35 - 52mm |
Material Thickness | 0.95 - 2.0mm or 20 - 14 gauge |
Roll Forming Stations | 13 adjustable stations |
Punching Stations | 10 Frame and Truss Punching Stations |
Standard Punch Tooling* | Service Hole, Web Bolt Hole, Dimple, Web Notch, Chamfer, Lip Cut, Flange Cut (left & right), Swage and Shear |
Max Line Speed | 5,400 ft./hr (1,680 m/hr) |
Typical Production Speed (actual dependent on framing design) | 985 - 1,970 ft/hr (300 - 600 m/hr) |
Main Drive Power | 13.6 kW (18.2 hp) |
Hydraulic Power | 15 kW (20 hp) |
Length | 29.86’ (9.1 m) |
Width | 5.74’ (1.75 m) |
Height - to top of covers | 7.22' (2.2 m) |
Weight (approx.) | 22,050 lb (10,000 kg) |
Printer | 2 Printer Heads |
Decoiler Capacity | 6,600 lb (3,000 kg) powered decoiler |
To contact FRAMECAD Limited about Framecad Roll Formers | ST925iT use Get a quote.
The ST925iT is an ideal solution for multi profile construction projects for mid-rise commercial, and residential buildings. Able to manufacture from 0.95 - 2.00 or 20 - 14 gauge, it is ideal for manufacturing wall frames, wide spanning roof trusses or long spanning floor joists.
Product Features:
Product Specifications:
ST925iT | |
---|---|
Profile Width (Web) | Range 3 1/2 - 12” or 89 - 305 mm |
Profile Height (Flange) | Between 1 1/3 - 2” or 35 - 52mm |
Material Thickness | 0.95 - 2.0mm or 20 - 14 gauge |
Roll Forming Stations | 13 adjustable stations |
Punching Stations | 10 Frame and Truss Punching Stations |
Standard Punch Tooling* | Service Hole, Web Bolt Hole, Dimple, Web Notch, Chamfer, Lip Cut, Flange Cut (left & right), Swage and Shear |
Max Line Speed | 5,400 ft./hr (1,680 m/hr) |
Typical Production Speed (actual dependent on framing design) | 985 - 1,970 ft/hr (300 - 600 m/hr) |
Main Drive Power | 13.6 kW (18.2 hp) |
Hydraulic Power | 15 kW (20 hp) |
Length | 29.86’ (9.1 m) |
Width | 5.74’ (1.75 m) |
Height - to top of covers | 7.22' (2.2 m) |
Weight (approx.) | 22,050 lb (10,000 kg) |
Printer | 2 Printer Heads |
Decoiler Capacity | 6,600 lb (3,000 kg) powered decoiler |
To contact FRAMECAD Limited about Framecad Roll Formers | ST925iT use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product