Overview of technical data
| Q (50Hz) | 4.0 – 180.0 (m³/h) |
| H (50Hz) | 5.0 – 105.0 (m) |
| Type of bearing | Ball bearings |
| Casing partition | Radially split |
| Drive | IEC standardized motor, electric motor |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | 1.4408, JL 1040 |
| Type of installation | Long-coupled |
| Type of coupling | Direct |
| Type of lubrication | Grease / Oil lubrication |
| Max. permissible fluid temperature | 90.0 (°C) |
| Guaranteed to be silicon-free | Yes |
| Nozzle position | End suction |
| Maximum operating pressure | PN 16 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Shaft material (EN standard) | 1.4462, C45+N, 1.4571 |
| Suction characteristics | Self-priming |
| Suitable for drinking water | Yes |
| Type of casing | Volute casing |
| Type of impeller | Multi-vane impeller, Open |
| Type of connection | Screw-ended, flange |
| Casing material (EN standard) | 1.4408, JL 1040 |
| Free passage | 10.0 (mm) |
| Installation position | Horizontal |
| Shaft seal type | Mechanical seal |
| Main applications | Building services, Water, Industry and process engineering, Waste water / sewage |
| Casing material | Cast stainless steel, Cast iron |
| Maximum discharge-side pressure | 10.0 (bar) |
| Maximum drive rating | 37.0 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
