Etanorm-RX | Volute Pump for sale from KSB Australia

Etanorm-RX | Volute Pump

Supplier: KSB Australia

Etanorm-RX | Volute Pump

Horizontal, long-coupled, single-stage volute casing pump (pump size 125-500 with two stages) in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings. Design to ATEX.

21 Recent Views In Stock

Applications

Spray irrigation, irrigation, drainage, district heating, water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, fire-fighting systems, handling of hot water, cooling water, fire-fighting water, oil, brine, drinking water, brackish water, service water, etc.

Main applications

Biofuels
Desalination
Fire fighting and sprinkler systems
Irrigation
Municipal waste water
Pressure boosting
Rawwater transport
Steel
Systems
Waste water
Water
Water supply
Water works
Watertransport
Watertreatment

Overview of technical data

Q (50Hz)	18.0 – 600.0 (m³/h)
H (50Hz)	35.0 – 105.0 (m)
Type of bearing	Ball bearings
Casing partition	Radially split
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor, turbine, I.C. engine
Drive voltage	Low voltage
No. of impeller entries	Single entry
Impeller material (EN standard)	CC480K-GS, CUSN10-C-GS, G-CUSN10
Type of installation	Long-coupled
Type of coupling	Direct
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	20.0 (°C)
Nozzle position	End suction
Maximum operating pressure	PN 10
Pull-out design	Yes
Pump set location	Dry installed
Shaft material (EN standard)	1.4057.05
Suction characteristics	Non-priming
Type of casing	Volute casing
Type of impeller	Radial, Closed / Radial, Closed, Multi-vane impeller
Type of connection	Flange
Casing material (EN standard)	JL 1040, GJL-250
eClass assignment	36410000, 36410101, 36410100
Installation position	Horizontal
Shaft seal type	Mechanical seal, Gland packing
Main applications	Building services, Industry and process engineering, Water
Casing material	Cast iron
Maximum discharge-side pressure	10.0 (bar)
Type of installation	Stationary
Maximum speed of rotation	2940.0 (1/min)

Applications

Main applications

Biofuels
Desalination
Fire fighting and sprinkler systems
Irrigation
Municipal waste water
Pressure boosting
Rawwater transport
Steel
Systems
Waste water
Water
Water supply
Water works
Watertransport
Watertreatment

Overview of technical data

Q (50Hz)	18.0 – 600.0 (m³/h)
H (50Hz)	35.0 – 105.0 (m)
Type of bearing	Ball bearings
Casing partition	Radially split
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor, turbine, I.C. engine
Drive voltage	Low voltage
No. of impeller entries	Single entry
Impeller material (EN standard)	CC480K-GS, CUSN10-C-GS, G-CUSN10
Type of installation	Long-coupled
Type of coupling	Direct
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	20.0 (°C)
Nozzle position	End suction
Maximum operating pressure	PN 10
Pull-out design	Yes
Pump set location	Dry installed
Shaft material (EN standard)	1.4057.05
Suction characteristics	Non-priming
Type of casing	Volute casing
Type of impeller	Radial, Closed / Radial, Closed, Multi-vane impeller
Type of connection	Flange
Casing material (EN standard)	JL 1040, GJL-250
eClass assignment	36410000, 36410101, 36410100
Installation position	Horizontal
Shaft seal type	Mechanical seal, Gland packing
Main applications	Building services, Industry and process engineering, Water
Casing material	Cast iron
Maximum discharge-side pressure	10.0 (bar)
Type of installation	Stationary
Maximum speed of rotation	2940.0 (1/min)