Epilog Laser Cutting and Engraving Machine ...

Epilog - Laser Cutting and Engraving Machine | Fusion M2 Laser Series

Supplier: Alfex CNC Australia

Laser Cutting and Engraving Machine | Fusion M2 Laser Series

The Fusion M2 Laser Series with DUAL SOURCE LASER capabilities (fiber and C02) is Epilog’s most advanced concept in laser system design.

Video for Epilog Laser Cutting and Engraving Machine | Fusion M2 Laser Series

28 Recent Views In Stock

Available in two sizes, the Fusion M2 32 and the larger Fusion M2 40. Featuring new motion control design and job management software, along with the industry’s highest quality flame-polished edge cuts, large viewing door with LED lighting and Epilog’s highest engraving and cutting speeds yet.

All Epilog Laser Systems are 100% designed, engineered and built in the USA.

FEATURES

Made-in-the-USA Quality
Higher-Resolution Radiance™ Standard Optics
Super-Silent™ Cooling Fans
CO2 Waveguide Laser Tubes by Epilog
Long-Lasting Steel Bearings
Strong, Long-Lasting Drive Belts
Superior Chassis Strength
Joystick Controls
Advanced Motion Control
Flame Polished Edge Cuts
Temperature Sensor/Emergency Stop Button
Motorized Table

Laser Dashboard™ Print Driver

The Laser Dashboard™ controls your laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages.

Flame Polished Edge Cuts

You can now achieve the best edge quality on laser-cut acrylic that we’ve ever seen on a small-format laser system. The premier motion control also provides the fastest cutting on thin materials.

Fusion Laser Safety Features

Epilog have built-in a temperature sensor into the Fusion as well as including an Emergency Stop Button. These built-in features not only help ensure the safety of your employees and workspace.

Super-Silent™ Cooling Fans

With the Super-Silent™ Cooling Fans available exclusively from Epilog Laser, you can run your laser equipment with minimal background noise. The Super-Silent Cooling Fans make for a much more comfortable and productive work area.

Higher-Resolution Radiance™ Standard Optics

No additional, expensive lens packages needed for the highest resolution engraving with our Radiance Optics. With any laser system over 24″ in carriage length, the Radiance Optics package is included to provide higher quality, more consistent beam accuracy across the entire table.

Job Manager Software

The Epilog Job Manager is a great time saver and organizational resource for you. From one place you can access any job you have sent to the laser, view the settings you used on any past job, re-run projects, access your material database & more.

MODELS

Epilog Fusion M2 32 Laser:

With a large table size of 812 x 508 mm (32″ x 20″), the Fusion M2 32 is Epilog’s newest product offering! The high-quality engraving across the entire table is a result of the highest-quality components, high-speed servo motors, and the exciting optional Dual Source and Camera Registration options.

Epilog Fusion M2 40 Laser:

With an oversized table of 40″ x 28″ (1016 x 711 mm), the Fusion M2 40 features Epilog’s largest work area. This machine was designed to engrave the same high-quality image at any point on the table by utilising our top-of-the-line motion control system and industry-leading optics system.

OPTIONAL FEATURES

Dual Source Option: CO2 and Fiber

Add the fiber laser’s metal etching capabilities to the CO2 laser’s versatility. Are you looking for the material versatility of a CO2 laser in addition to the direct metal etching of a fiber laser? Add on the dual source option to your Fusion M2 32 or Fusion M2 40 by choosing both a CO2 laser (50, 60 or 75 watts) and a fiber laser (30 or 50 watts) to work with a wider range of materials.

Epilog eView Camera Module

Add laser cutting to your printed projects with our unique three camera design. The easiest, most precise method of cutting printed graphics on wood, cardboard, acrylic, paper, and more. Simply add registration marks to your printed graphic and produce precise laser cuts. The eView features three cameras located inside the system to increase cutting accuracy, including two built into the lid for the easiest positioning of projects.

Fusion Rim-Drive Rotary Attachment

The Standard Rim-Drive Rotary Attachment allows you to engrave wine bottles, mugs, glasses and more.Available for the Fusion Laser, the Standard Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item up to 10.25″ (260 mm) in diameter. The Fusion Laser rotary attachment has been built to accommodate a large variety of shapes and sizes. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser!

Fusion 3-Jaw Chuck Rotary Attachment

When more precision is required, the 3-Jaw Chuck Rotary Attachment is the ideal choice. Only available for the Fusion Laser, the 3-Jaw Chuck mechanically clamps a cylinder or oddly-shaped, non-cylindrical item place as the laser engraves. The Fusion Laser rotary attachment has been built to accommodate a large variety of shapes and sizes. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser!

Vector Cutting Table

Raises laser cut materials off the table for better edges. Incorporate the gridded cutting table on your Fusion laser system when cutting through materials. By raising the materials when cutting off the table, you’ll be able to reduce the back-side burning on the material.

PhotoLaser Plus Software

Photo processing software that optimizes your photographs for engraving on a variety of materials. PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials.

LASER WATTAGES

Epilog Fusion M2 32

Epilog Fusion M2 40

CO2: 30, 40, 50, 60, 75, or 120 watts

Fiber: 30 or 50 watts

Dual source: CO2 50, 60, or 75 watts;
Fiber 30 or 50 watts

CO2: 30, 40, 50, 60, 75, or 120 watts

Fiber: 30 or 50 watts

Dual source: CO2 50, 60, or 75 watts;
Fiber 30 or 50 watts

TECH DATA

	Epilog Fusion M2 32 Fiber	Epilog Fusion M2 40 Fiber
Engraving Area	32″ x 20″ (812 x 508 mm)	40″ x 28″ (1016 x 711 mm)
Focal Length (F-Theta Lens)	3″ (76.2 mm)	3″ (76.2 mm)
Maximum Material Thickness	12.5″ (317 mm)	12.25″ (311 mm)
Laser Wattage	30 or 50 watts	30 or 50 watts
Laser Type	Solid State Pulsed Ytterbium Fiber Laser (air cooled)	Solid State Pulsed Ytterbium Fiber Laser (air cooled)
Mode of Operation	Pulsed 20-80 kHZ	Pulsed 20-80 kHZ
Repetition Rate (Frequency)	20 kHZ – 100 kHz depending on the laser wattage.	20 kHZ – 100 kHz depending on the laser wattage.
Intelligent Memory Capacity	Multiple file storage up to 128 MB.	Multiple file storage up to 128 MB.
Laser Source	State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.	State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Size (WxDxH)	52.5″ x 33.75″ x 40.75″ (1334 x 857 x 1035 mm) 37.75″ (959 mm) deep with exhaust plenum.	60.5″ x 41.25″ x 42.25″ (1537 x 1048 x 1073 mm)) 43″ (1092 mm) deep with exhaust plenum.
Weight	500 lbs (227 kg) Dual Source: 536 lbs (243 kg)	643 lbs (292 kg) Dual Source: 679 lbs (308 kg)
Electrical Requirements	Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.	Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
Maximum Table Weight	200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
Ventilation System	External exhaust or internal filtration system is required via two 4″ (101.6 mm) output ports.	External exhaust or internal filtration system is required via two 4″ (101.6 mm) output ports.

Laser Dashboard™ Print Driver

The Laser Dashboard™ controls your laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages.

Flame Polished Edge Cuts

You can now achieve the best edge quality on laser-cut acrylic that we’ve ever seen on a small-format laser system. The premier motion control also provides the fastest cutting on thin materials.

Fusion Laser Safety Features

Epilog have built-in a temperature sensor into the Fusion as well as including an Emergency Stop Button. These built-in features not only help ensure the safety of your employees and workspace.

Super-Silent™ Cooling Fans

Higher-Resolution Radiance™ Standard Optics

Job Manager Software

MODELS

Epilog Fusion M2 32 Laser:

Epilog Fusion M2 40 Laser:

OPTIONAL FEATURES

Dual Source Option: CO2 and Fiber

Epilog eView Camera Module

Fusion Rim-Drive Rotary Attachment

Fusion 3-Jaw Chuck Rotary Attachment

Vector Cutting Table

PhotoLaser Plus Software

LASER WATTAGES

Epilog Fusion M2 32

Epilog Fusion M2 40

CO2: 30, 40, 50, 60, 75, or 120 watts

Fiber: 30 or 50 watts

Dual source: CO2 50, 60, or 75 watts;
Fiber 30 or 50 watts

CO2: 30, 40, 50, 60, 75, or 120 watts

Fiber: 30 or 50 watts

Dual source: CO2 50, 60, or 75 watts;
Fiber 30 or 50 watts

TECH DATA

	Epilog Fusion M2 32 Fiber	Epilog Fusion M2 40 Fiber
Engraving Area	32″ x 20″ (812 x 508 mm)	40″ x 28″ (1016 x 711 mm)
Focal Length (F-Theta Lens)	3″ (76.2 mm)	3″ (76.2 mm)
Maximum Material Thickness	12.5″ (317 mm)	12.25″ (311 mm)
Laser Wattage	30 or 50 watts	30 or 50 watts
Laser Type	Solid State Pulsed Ytterbium Fiber Laser (air cooled)	Solid State Pulsed Ytterbium Fiber Laser (air cooled)
Mode of Operation	Pulsed 20-80 kHZ	Pulsed 20-80 kHZ
Repetition Rate (Frequency)	20 kHZ – 100 kHz depending on the laser wattage.	20 kHZ – 100 kHz depending on the laser wattage.
Intelligent Memory Capacity	Multiple file storage up to 128 MB.	Multiple file storage up to 128 MB.
Laser Source	State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.	State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Size (WxDxH)	52.5″ x 33.75″ x 40.75″ (1334 x 857 x 1035 mm) 37.75″ (959 mm) deep with exhaust plenum.	60.5″ x 41.25″ x 42.25″ (1537 x 1048 x 1073 mm)) 43″ (1092 mm) deep with exhaust plenum.
Weight	500 lbs (227 kg) Dual Source: 536 lbs (243 kg)	643 lbs (292 kg) Dual Source: 679 lbs (308 kg)
Electrical Requirements	Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.	Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
Maximum Table Weight	200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
Ventilation System	External exhaust or internal filtration system is required via two 4″ (101.6 mm) output ports.	External exhaust or internal filtration system is required via two 4″ (101.6 mm) output ports.