DC Converters for sale from Micromax - IndustrySearch Australia

DC Converters

Supplier: Micromax

DC Converters

Our DC-DC converters provide regulated DC voltage when only DC is available. This will enable conversion to various voltage levels, in addition to electrical isolation to help set up independent power supply systems.

In Stock

At Micromax Technology, we supply an extensive range of DC-DC Converters with wide ranging inputs (5V – 2000V DC).

Typical output voltages are 3.3, 5, 12, 15 and 24Vdc in single, dual or triple output configurations.

Depending on the model, DC-DC converters are available in enclosures or open-frame with wattages from 3W. These converters are DIN rail mountable or may be modifiable for DIN rail applications.

Our partners, Statronics, are at the forefront of high-performance design in power supplies, becoming one of the most renowned suppliers of DC to DC power converters in Australia, USA and New Zealand.

Safety is our priority

We are committed to not only meeting, but exceeding Australian safety standards. By incorporating technology such as preventive monitoring of output voltage, input voltage and output current, we optimise the reliability of our dc-dc converter power supply products.

Advantages of DC to DC converters

High efficiency
Short circuit and overload protection
Durable design
Transient suppression
Convenient DIN Rail mounting available
Up to 5 year warranty

Need a custom design power supply?

If our DC-DC converter power supplies are not the best solution for your application, then talk to us about a custom design power supply to meet your business needs.

Applications

Short circuit and overload protection
High Efficiency
Durable Design
Transient suppression

Key features of our DC to DC converter range

Statronics

Offering DC-DC converters in a variety of enclosure types, including open-frame and DIN mount options. Statronics give high priority to quality and reliability.

Statronics provide single, double and triple output DC-DC converters. Input voltages range from 4.5Vdc to 1000Vdc. Handing max power of up to 1000W, Statronics can supply the perfect DC-DC converter for your specific application.

Adel System
Non-Isolated DC-Dc Steup-Up Unit

Adel System

This line is designed for all non-industrial applications: isolated and non-isolated power supply units/converters, able to supply input-output voltages equal to or different from rated input voltage. Their primary function is to compensate fluctuations in input voltage and maintain a stable output. Available in DIN rail mountable formats, all have short-circuit and overload protection on the output, guaranteeing a stable output voltage. Like all Adel system products they comply with the latest standards applied to the industry.

Non-isolated DC-DC STEP-UP unit

The low voltage power supplies/converters in the STEP-UP range are suitable for producing voltages higher than the input voltage. They are typically used for currents of 3-6A, in cases where there is a rated input voltage of 12Vdc transformed into higher output voltage, perhaps to connect to a 12Vdc battery to then power a 24Vdc PLC. STEP-UP units feature switch-mode technology, are DIN Rail Mountable, and have output short-circuit and overload protection. For use in industrial and automotive applications, they are particularly reliable, robust, easy to use and comply with the latest regulatory standards.

Main Features

Input: 12 Vdc
Output: 24 – 30 – 40 – 48 – 60 Vdc
Output In: 3 A ÷ 6 A
Adjustable output ±10%
Ambient temperature operation field: 0 – 50° C
IP20

Current Logic

Low-cost waterproof IP 67/68 DC-DC converter

An electric car still uses a 12 volt system to power all of the original 12 volt accessories: lights, horn, etc. This may also power some control circuits for the electric drive system. However, unlike a gas car, there is no alternator to keep this battery charged. One option in the early days of EVs was to use a deep cycle 12 volt battery, as heavy duty as possible, and recharge it when you charge the main battery pack. This is not adequate if any amount of night driving is intended. As the battery drains in use, the headlights will grow dimmer and the turn signals flash more slowly. It can also effect the running of the car if some of the drive system components do not get the 12 volt signal they require.

It would seem to be simple to tap 12 volt from one or two of the main pack batteries. This is not recommended, because it will cause the pack to discharge unevenly, affecting performance and battery life. It also violates the isolation of the traction pack from the chassis, which is required by some components, and necessary for safety.

The solution is a car power technology dc-dc converter. This taps the full battery pack voltage and cuts it down to a regulated output, similar to that from an alternator. By tapping the full pack, there is no uneven discharge. Amperage required is so low that there is little effect on range. Isolation of the high and low voltage systems is maintained inside the DC/DC converter. This also eliminates the need for a separate 12 volt charging circuit for an auxiliary battery.

Our wide selection of dc voltage regulator (dc-dc converters, dc voltage reducer, voltage booster, step down converter, step up converter) also help you convert golf cart batteries (and other battery banks) to another voltage.

2/24/36/48/60V to 5V DC-DC converters

2/24/36/48/60V to 5V, converters are widely used with GPS/phones/recorder etc in car or other devices that use 5V.

Features:

all-epoxy sealed containers, IP 67 Waterproof
Input range 10~35VDC
Output 5VDC, 5A or 10A max
Ripple 50~80mV
efficiency:> 93%
temperature at -10 ? – 45 ?
over-current / low input voltage protection

48V to 12V converters

48V to 12V converters are widely used in golf cart / fork lift etc.