Campbell Scientific Data Logger | CR 310

Campbell Scientific - Data Logger | CR 310

Data Logger | CR 310

The Campbell Scientific CR310 is a multi-purpose, compact, low-cost measurement and control data logger that includes an integrated 10/100 Ethernet port and removable terminal connectors.

75 Recent Views Call for more details

The CR 310 entry-level data logger, with its rich instruction set, can measure most hydrological, meteorological, environmental, and industrial sensors. It will concentrate data, making it available over varied networks and deliver it using your preferred protocol. The CR310 also performs automated on-site or remote decision making for control and M2M communications. The CR310 is ideal for small applications requiring long-term, remote monitoring and control.

The primary differences between the CR300 and CR310 are that the CR310 offers removable connectors and a 10/100 Ethernet connection.

The CR310 has multiple radio options that are suitable for different regions:

CR310-RF407: US and Canada
CR310-RF412: Australia and New Zealand
CR310-RF422: Europe

Benefits and Features

Set up easily with PC software and USB connectivity
Measure with confidence analog and digital sensors
Internet-ready email, FTP, HTTP/web, TCP–with required add-ons
Trust in the Campbell Scientific quality, including integral surge and ESD protection
Save money and space using the integrated Ethernet port
Network wirelessly to another node or Internet gateway with integrated radio option
CR310-WIFI ideal for short-range, wireless IP communication
Wiring made easy through removable terminal block
Communicate from anywhere when using cellular or satellite peripheral
Charge batteries using the integrated 12 V battery solar charge regulator
Measure smart sensors using RS-232 or SDI-12
Connect with PakBus, Modbus, DNP3, GOES, and other standard communication protocols
Analyze and control with programmability and multiple general purpose I/O
Notify with event-driven communications and physical outputs

Terminal Descriptions

One switched 12 V terminal (SW12V) for powering sensors or communication devices, 1100 mA @ 20°C
Two sensor excitation or continuous 0.15 to 5 V terminals (VX1, VX2) for sensor excitation or output control
Six multipurpose analogue input terminals (SE1 - SE6)
- Analogue functions (SE1 - SE6)
  - Analogue inputs: 6 single-ended or 3 differential inputs with -100 to +2500 mV and ±34 mV ranges 24 bit ADC
  - 4 to 20 mA or 0 to 20 mA inputs (SE1, SE2 only)
- Digital I/O functions (SE1 - SE4) consist of 3.3 V logic levels for:
  - High frequency counter (35 kHz)
  - Pulse width modulation
  - Interrupts and timer input
  - Period average (200 kHz, amplitude dependent)
Two Pulse Counting Terminals (P_SW, P_LL)
- P_SW
  - Switch closure (150 Hz)
  - High frequency counter (35 kHz)
- P_LL
  - Low level ac (20 kHz)
  - High frequency counter (20 kHz)
Two Control Terminals (C1, C2): C terminals are software configurable for digital functions
- Digital I/O functions consist of 5 V output and 3.3 V input logic levels for:
  - SDI-12
  - High frequency counter (3 kHz)
  - Switch closure (150 Hz)
  - General status/control
  - Voltage source 5 V: 10 mA @ 3.5 V
  - Interrupts
  - Serial asynchronous communication Tx/Rx pair

To contact Campbell Scientific Australia about Campbell Scientific Data Logger | CR 310 use Get a quote.

The primary differences between the CR300 and CR310 are that the CR310 offers removable connectors and a 10/100 Ethernet connection.

The CR310 has multiple radio options that are suitable for different regions:

CR310-RF407: US and Canada
CR310-RF412: Australia and New Zealand
CR310-RF422: Europe

Benefits and Features

Set up easily with PC software and USB connectivity
Measure with confidence analog and digital sensors
Internet-ready email, FTP, HTTP/web, TCP–with required add-ons
Trust in the Campbell Scientific quality, including integral surge and ESD protection
Save money and space using the integrated Ethernet port
Network wirelessly to another node or Internet gateway with integrated radio option
CR310-WIFI ideal for short-range, wireless IP communication
Wiring made easy through removable terminal block
Communicate from anywhere when using cellular or satellite peripheral
Charge batteries using the integrated 12 V battery solar charge regulator
Measure smart sensors using RS-232 or SDI-12
Connect with PakBus, Modbus, DNP3, GOES, and other standard communication protocols
Analyze and control with programmability and multiple general purpose I/O
Notify with event-driven communications and physical outputs

Terminal Descriptions

One switched 12 V terminal (SW12V) for powering sensors or communication devices, 1100 mA @ 20°C
Two sensor excitation or continuous 0.15 to 5 V terminals (VX1, VX2) for sensor excitation or output control
Six multipurpose analogue input terminals (SE1 - SE6)
- Analogue functions (SE1 - SE6)
  - Analogue inputs: 6 single-ended or 3 differential inputs with -100 to +2500 mV and ±34 mV ranges 24 bit ADC
  - 4 to 20 mA or 0 to 20 mA inputs (SE1, SE2 only)
- Digital I/O functions (SE1 - SE4) consist of 3.3 V logic levels for:
  - High frequency counter (35 kHz)
  - Pulse width modulation
  - Interrupts and timer input
  - Period average (200 kHz, amplitude dependent)
Two Pulse Counting Terminals (P_SW, P_LL)
- P_SW
  - Switch closure (150 Hz)
  - High frequency counter (35 kHz)
- P_LL
  - Low level ac (20 kHz)
  - High frequency counter (20 kHz)
Two Control Terminals (C1, C2): C terminals are software configurable for digital functions
- Digital I/O functions consist of 5 V output and 3.3 V input logic levels for:
  - SDI-12
  - High frequency counter (3 kHz)
  - Switch closure (150 Hz)
  - General status/control
  - Voltage source 5 V: 10 mA @ 3.5 V
  - Interrupts
  - Serial asynchronous communication Tx/Rx pair