Bulltech M300-Multiple
SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
M300-Multiple |
|
LASER SYSTEM | Type:fiber laser Wave length:1064nm Power:500W |
RECOATING SYSTEM | Process:scraper coating Layer Thickness:0.02-0.1mm |
OPTICAL & SCANNING | Beam (diameter@1/e2):≤0.07mm
Scanning Galvanometer:ScanLab Scanning Speed: up to 7 m/s Building Speed:2-20cm³/h |
ELEVATOR | Drive Mode :servo motor precision reduction drive Printing Board Bearing Weight :≥200kg Repositioning Accuracy: ±0.005mm |
BUILD VAT | Volume:≥10L Size:250mm(X) * 250mm(Y) * 300mm(Z) Materials:2-4 different materials prinitng at same time Protective gas:N2 / Argon Materials:Stainless Steel /
Die Steel / Titanium Alloy / Aluminum Alloy / Co-Cr Alloy / Nickel Alloy / Copper / Precious Metal etc. |
SOFTWARE | Control Software:Bulltech Date Preparation Software:Materialise Magics Data Interface:STL or other convertible format |
WORKING CONDITION | Power:220VAC 50/60Hz, 45Amps, single phase Ambient Temperature:15-36ºC Relative Humidity:≤ 65% Dimension: 1600m(L)*1100mm(W)*2600mm(H) |
Key Features
To contact Plasquip Sales and Smart Manufacturing & Packaging Solutions about Bulltech M300-Multiple use Get a quote.
SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
M300-Multiple |
|
LASER SYSTEM | Type:fiber laser Wave length:1064nm Power:500W |
RECOATING SYSTEM | Process:scraper coating Layer Thickness:0.02-0.1mm |
OPTICAL & SCANNING | Beam (diameter@1/e2):≤0.07mm
Scanning Galvanometer:ScanLab Scanning Speed: up to 7 m/s Building Speed:2-20cm³/h |
ELEVATOR | Drive Mode :servo motor precision reduction drive Printing Board Bearing Weight :≥200kg Repositioning Accuracy: ±0.005mm |
BUILD VAT | Volume:≥10L Size:250mm(X) * 250mm(Y) * 300mm(Z) Materials:2-4 different materials prinitng at same time Protective gas:N2 / Argon Materials:Stainless Steel /
Die Steel / Titanium Alloy / Aluminum Alloy / Co-Cr Alloy / Nickel Alloy / Copper / Precious Metal etc. |
SOFTWARE | Control Software:Bulltech Date Preparation Software:Materialise Magics Data Interface:STL or other convertible format |
WORKING CONDITION | Power:220VAC 50/60Hz, 45Amps, single phase Ambient Temperature:15-36ºC Relative Humidity:≤ 65% Dimension: 1600m(L)*1100mm(W)*2600mm(H) |
Key Features
To contact Plasquip Sales and Smart Manufacturing & Packaging Solutions about Bulltech M300-Multiple use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product