AUSROAD Spray Equipment | Emulsion Spray ...

AUSROAD - Spray Equipment | Emulsion Spray Units

Supplier: Ausroad

Spray Equipment | Emulsion Spray Units

AUSROAD™ offers our Emulsion Systems as self-contained units that can be custom-built to your specifications.

19 Recent Views In Stock

The Emulsion Spray Unit comes with various outlets including a spray wand and spray bar and a crack-filling device. Used for general road maintenance work, the units can be either skid or trailer-mounted. They offer various applications, including emergency repairs.

Built to your requirements
Low maintenance unit
Easy to operate controls.

Trailer mounted emulsion sprayer

565 – 2,000-litre capacity Class 2B emulsion pressure vessel with pressure relief valve and inspection points as per AS1210
Emulsion Dipstick provided
Petrol engine powered by a three cylinder cast-iron air compressor
40-litre air receiver with pneumatic pressure switch to idle compressor motor
40-litre kerosene tank for flushing line
Steel emulsion hose reel and 10m steel braided hose wand
Lockable tool box
Spray bar (2.4m/eight nozzle remote activation).

Trailer Fitting

The Emulsion Systems are fitted to new 2 – 3 tonne Aggregate Trailer Mass (ATM) steel tandem axle trailer complete with:

Trailer suspension kit to suit tank volume
Supplied with spare wheel. The wheel brace is mounted on the trailer with the jockey wheel assembly and the spare tyre is mounted on drawbar
205R16 eight ply tyres
LED side & tail lights
Hitch for 50mm ball, metal seven-pin round large trailer plug (or as required by client)
Emergency break away chains
Swing away removable landing leg.

The trailer is fully powder-coated in colour as required. The powder-coating provides a more durable finish than paint. This enables the unit to look clean and well presented for years to come.

Sand blasted to class 2.5
Under-coated zinc, powder primer ‘Corro Zinc’ (epoxy)
Top-coat ‘white’ powder-coated, (polyester powder).

Skid mounted emulsion sprayer

Skid mounted and able to be lifted with forklift from three sides
Emulsion pressure vessel built to Australian Standard 1210 Transportable Pressure Vessel
40-litre kerosene tank (pressurised) for flushing lines
Two-cylinder cast iron compressor with petrol engine
14-CFM compressor with pull-start petrol motor
40-litre air receiver
Powder-coated frame
Steel retractable hose reel with 10m 5/8 emulsion hose
Emulsion wand with spray nozzle
Kerosene flush/air purge capability
Individual pressurise/vent of pressure tanks
Power-coated frame

Emulsion spray unit with mini spray pack

This is the simplest unit we manufacture. We use the existing emulsion drum, which saves costs, as no emulsion tank is required. You will also be able to connect directly to a 1,000-litre plastic pod if required.

Unit includes:

Powder-coated base assembly
“Robin” petrol driven motor and pump
40-litre kerosene/diesel tank to allow flushing of pump and lines when unit is to be stored
Steel retractable hose reel with 12 m 5/8th hose
2-metre hand wand for emulsion spraying
Drum spear and hoses required.

*Drums/pods of emulsion supplied by customer.

To contact Ausroad about AUSROAD Spray Equipment | Emulsion Spray Units use Get a quote.

Built to your requirements
Low maintenance unit
Easy to operate controls.