Amacan S | Submersible Motor Pump
Pumping water not containing stringy material in irrigation and drainage pumping stations, general water supply systems, water pollution and flood control.
Q (50Hz) | 500.0 – 21,600.0 (m³/h) |
H (50Hz) | 2.5 – 55.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Diffuser material (EN standard) | 1.4057, 1.4021 |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 400/690 V, 3~ |
No. of impeller entries | Single entry |
Impeller material (EN standard) | CC480K-GS, CC333G-GS |
Type of installation | In-line |
Type of coupling | None |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 40.0 (°C) |
Nozzle position | In-line |
Pump set location | Wet well |
Shaft material (EN standard) | 1.4021, 1.4057 |
Suction characteristics | Non-priming |
Suitable for drinking water | Yes |
Type of impeller | Mixed flow impeller |
Casing material (EN standard) | JL 1040 |
eClass assignment | 36410000, 36410106, 36410100 |
Free passage | 160.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | 00, Wasser, Energie, Bergbau / Baggerbetrieb |
Casing material | Cast iron |
Maximum drive rating | 1100.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 1800.0 (1/min) |
To contact KSB Australia about Amacan S | Submersible Motor Pump use Get a quote.
Pumping water not containing stringy material in irrigation and drainage pumping stations, general water supply systems, water pollution and flood control.
Q (50Hz) | 500.0 – 21,600.0 (m³/h) |
H (50Hz) | 2.5 – 55.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Diffuser material (EN standard) | 1.4057, 1.4021 |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 400/690 V, 3~ |
No. of impeller entries | Single entry |
Impeller material (EN standard) | CC480K-GS, CC333G-GS |
Type of installation | In-line |
Type of coupling | None |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 40.0 (°C) |
Nozzle position | In-line |
Pump set location | Wet well |
Shaft material (EN standard) | 1.4021, 1.4057 |
Suction characteristics | Non-priming |
Suitable for drinking water | Yes |
Type of impeller | Mixed flow impeller |
Casing material (EN standard) | JL 1040 |
eClass assignment | 36410000, 36410106, 36410100 |
Free passage | 160.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | 00, Wasser, Energie, Bergbau / Baggerbetrieb |
Casing material | Cast iron |
Maximum drive rating | 1100.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 1800.0 (1/min) |
To contact KSB Australia about Amacan S | Submersible Motor Pump use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product