Amacan K | Submersible Motor Pump
Pumping pre-cleaned chemically neutral waste water, industrial effluent, sewage, fluids not containing any stringy substances, pre-treated by screens and overflow sills; as waste water, mixed sewage and activated sludge pumps in waste water treatment plants, irrigation and drainage pumping stations.
Q (50Hz) | 140.0 – 7,200.0 (m³/h) |
H (50Hz) | 1.0 – 30.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 380 V, 400 V, 690 V, 3~ |
Explosion protection | ATEX II 2G T3 |
No. of impeller entries | Single entry |
Impeller material (EN standard) | 9.4460, JL 1040 |
Type of installation | Close-coupled |
Type of coupling | None |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 40.0 (°C) |
Nozzle position | In-line |
Pump set location | Wet well |
Shaft material (EN standard) | 1.4021QT700, C45+N, 1.4057 |
Suction characteristics | Non-priming |
Type of casing | Tubular casing |
Type of impeller | Multi-vane impeller, Radial, Closed |
Casing material (EN standard) | JL 1040 |
eClass assignment | 36410103, 36410100, 36410000 |
Free passage | 180.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Water, Waste water / sewage, Mining / Dredges |
Casing material | Cast iron |
Maximum drive rating | 320.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 1200.0 (1/min) |
To contact KSB Australia about Amacan K | Submersible Motor Pump use Get a quote.
Pumping pre-cleaned chemically neutral waste water, industrial effluent, sewage, fluids not containing any stringy substances, pre-treated by screens and overflow sills; as waste water, mixed sewage and activated sludge pumps in waste water treatment plants, irrigation and drainage pumping stations.
Q (50Hz) | 140.0 – 7,200.0 (m³/h) |
H (50Hz) | 1.0 – 30.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 380 V, 400 V, 690 V, 3~ |
Explosion protection | ATEX II 2G T3 |
No. of impeller entries | Single entry |
Impeller material (EN standard) | 9.4460, JL 1040 |
Type of installation | Close-coupled |
Type of coupling | None |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 40.0 (°C) |
Nozzle position | In-line |
Pump set location | Wet well |
Shaft material (EN standard) | 1.4021QT700, C45+N, 1.4057 |
Suction characteristics | Non-priming |
Type of casing | Tubular casing |
Type of impeller | Multi-vane impeller, Radial, Closed |
Casing material (EN standard) | JL 1040 |
eClass assignment | 36410103, 36410100, 36410000 |
Free passage | 180.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Water, Waste water / sewage, Mining / Dredges |
Casing material | Cast iron |
Maximum drive rating | 320.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 1200.0 (1/min) |
To contact KSB Australia about Amacan K | Submersible Motor Pump use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product