YLM - Twin-head Double-bend tube bender - CR-T50D Get latest price

Read more...

To contact Delahenty Machinery about YLM Twin-head Double-bend tube bender - CR-T50D use Get a quote.

• High production capacity: Max.720 pcs of two-end bending pipes in one hour.
• Bending angles are adjustable from 0°~180°.
• With the proportional pressure control, you can handle 2 pipes synchronously & rapidly and get the final production with precise angles & perfect surface without wrinkles.
• The 2 angles can be different & adjustable. So this machine is the most proper machine for general two-end bending.
• Both manual and automatic operation are available.
• The machine is equipped with emergency stop device.
• Bending angles are adjustable from 0° ~ 180°.
• High production capacity: Max.720 pcs of two-end bending pipes in one hour.
• The distance between the center line of 2 main shafts are 180 m/m (Min.) & 930 m/m (Max.) for CR-T38 type.

Production capacity for CR-T50:

• produce 1 pipe each time for O.D. 51 ~ O.D. 38 m/m .
• Produce 3 pipes (Max.) at the same time for O.D. 22 m/m & smaller pipes. (Tube w.t ≤ 1.5 m/m)

Double-Head Bender Features:

• Proportional pressure controlled hydraulic driven rotation of wiper around the bend die
• Hydraulic clamping of tube between bend die and clamp block
• Hydraulic actuation of pressure die
• Adjustable bending angles from 0 to 180 degrees
• Each side can be set to different degree of bends
• Automatic or manual operation
• Each side speed controlled individually
• Easily accessible multiple Emergency Stops
• Possibility to adjust timing between each motion
• Safety scanners and light curtains (optional)
• Material profiles that can be bent on a Double-Head Bender:

Round Tube or Pipe

• Square or Rectangular Tube
• Angle Iron
• Solid Bar
• Aluminum Profile
• Metal section

Read less...

To contact Delahenty Machinery about YLM Twin-head Double-bend tube bender - CR-T50D use Get a quote.