Stainless Steel Electro Polishing Machine | mepBLITz Series 3 Get latest price

Read more...

To contact Weldmart Australia about Stainless Steel Electro Polishing Machine | mepBLITz Series 3 use Get a quote.

The machine - mepBLITz  Series 3

mepBLITz Electrode Cooled Boot

• 2400 watts max
• Peak Amps 60
• Constant Amps 20 – 30 but all 100% effective amps
• Superior fluctuating DC wave
• Maximum RA / smoothness / Reflectivity (University Tested)
• Extension electrodes to access internal sections
• Works straight onto hot welds so speed enhancement possible
• Quality transformer can provide more usable current
• mepBLITz 6 times better corrosion resistance than mechanical finish (Sandvik Research 2010)
• No heat affect on non root side of cleaned weld

mepBLITz Solution Fed Brush

• 825 watts max
• Peak Amps 50
• Constant Amps 39 – 45 (Less Amp Fluctuation in use than TIG )
• DC wave reduces contamination that occurs with AC machines
• Solution feed means improved conductivity
• Solution feed means reduced micro pitting potential vs. dipping brush
• Focused polishing due to bristle sleeve
• Solution feed aids cooling and therefore speed
• Solution feed aids effective conductivity so effective polishing
• Single brush style

When to Use mepBLITz:

• The Electrode Cooled Boot System is recommended
• When maximum product integrity is required
• When maximum corrosion resistance is required
• When the highest level lustre/reflectivity is required
• On butt welds- mepBLITz polishes 72 meters 1.2mm in 1 hour
• On high quality concave welds,
• On hot welds
• Gauge 6mm plus
• MIG welds lots of filler
• Inside tubes using extension electrodes
• Great on tanks
• Good as a fixed station

mepBLITz Solution Fed Brush is recommended on:

• Difficult to access welds on ticker gauge material
• Corner welds
• Weld with variable fill/profile
• Extreme convex welds
• MIG welds with rough profile
• Cleaning upside down
• Speed of post weld finishing is critical and considered more important than RA
• The brush can clean 25cm of 6mm flat bar fuse weld in approx 30 sec.
• We estimate 3 hours to do 100m of 6mm MIG Weld

Technical Feature:

• 2400 watt peak
• 240 v AC
• 10 Amp
• No load Volts <35V
• Reusable long-life boots
• Long Life electrode tip
• Long life Brush
• Auto or manual electrolyte feed
• Non kink/burn resistant, 5 metre hose

CONTACT US TODAY TO FIND OUT MORE!

Read less...

To contact Weldmart Australia about Stainless Steel Electro Polishing Machine | mepBLITz Series 3 use Get a quote.