Genox Metal Complete Recycling Lines | ...

Genox - Metal Complete Recycling Lines | Designed For Purpose

Supplier: Applied Machinery

Metal Complete Recycling Lines | Designed For Purpose

The Complete Recycling Lines include the Steel Hinged Belt Conveyor, Twin Shaft Shredder, Vertical Shredder, and Central Dust Control System,

31 Recent Views In Stock

NewGenox Metals Recycling Systems.

Consisting of:

Steel Hinged Belt Conveyor

Shitable for the conveying heavy, sharp, difficult to handle materials in extremely demanding working environments.

Twin Shaft Shredder

High torque, slow speed shredding of the input materials into manageable strips, typically 100mm wide x 300 mm long, suitable for further processing in downstream equipment.

Vertical Shredder

For the aggressive size reduction and densification of pre-shredded materials into 50-80mm pieces. During this shredding process the material is sheared, crushed, rolled and smashed, creating a clean, dense, steel frag product, whilst also liberating other materials to allow for effective separations.

Central Dust Control System

Dust and fines created during the shredding process are extracted to a centralised filtration system through a series of ducting.

Bottom Fed Drum Magnet

Shredded material is conveyed by a vibratory feeder at a controlled rate to the under side of a drum magnet. Ferrous matal is attracted to the magnet and is delivered onto an inclined conveyor. The non ferrous falls beneath the magnet and is conveyed to an Eddy Current Separator.

Ferrous Metal Discharge

Separated ferrous material from the magnet system is conveyed to a single ischarge point.

Non-Metallics Discharge

Non-metallic material is conveyed to a drum screen ( trommel) and can besegregated into < 25mm, 25-50mm & 50mm+fractions.

Eddy Current Separator

The non magnatic materials are conveyed to the ECS rotor at a controlled rate. The material is separated by a diverter plate into non-ferrous ( aluminium, copper & brass) & non-metallic fractions (plastics etc.). These products can either be sold as is , or be further processed and upgraded to increase their value.

To contact Applied Machinery about Genox Metal Complete Recycling Lines | Designed For Purpose use Get a quote.

NewGenox Metals Recycling Systems.

Consisting of:

Steel Hinged Belt Conveyor

Shitable for the conveying heavy, sharp, difficult to handle materials in extremely demanding working environments.

Twin Shaft Shredder

High torque, slow speed shredding of the input materials into manageable strips, typically 100mm wide x 300 mm long, suitable for further processing in downstream equipment.

Vertical Shredder

For the aggressive size reduction and densification of pre-shredded materials into 50-80mm pieces. During this shredding process the material is sheared, crushed, rolled and smashed, creating a clean, dense, steel frag product, whilst also liberating other materials to allow for effective separations.

Central Dust Control System

Dust and fines created during the shredding process are extracted to a centralised filtration system through a series of ducting.

Bottom Fed Drum Magnet

Shredded material is conveyed by a vibratory feeder at a controlled rate to the under side of a drum magnet. Ferrous matal is attracted to the magnet and is delivered onto an inclined conveyor. The non ferrous falls beneath the magnet and is conveyed to an Eddy Current Separator.

Ferrous Metal Discharge

Separated ferrous material from the magnet system is conveyed to a single ischarge point.

Non-Metallics Discharge

Non-metallic material is conveyed to a drum screen ( trommel) and can besegregated into < 25mm, 25-50mm & 50mm+fractions.

Eddy Current Separator

The non magnatic materials are conveyed to the ECS rotor at a controlled rate. The material is separated by a diverter plate into non-ferrous ( aluminium, copper & brass) & non-metallic fractions (plastics etc.). These products can either be sold as is , or be further processed and upgraded to increase their value.

Read less...

To contact Applied Machinery about Genox Metal Complete Recycling Lines | Designed For Purpose use Get a quote.

Let Applied Machinery provide you with a quote

Supplier

Get a quote

Supplier: Applied Machinery

Distribution: Australia, New Zealand and The South Pacific

Location: Dandenong, VIC

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Applied Machinery are also proudly displaying these credentials:

Established:

1985

Employees:

6-20

Memberships:

AMTIL, WMAA

Distribution:

Australia, New Zealand and The South Pacific

Location:

Dandenong , VIC

Joined:

Aug 2013