Fiessler Elektronik and Banner Engineering ...
Several parallel light beams with a beam spacing of 7,5mm are controlled by a single-chip micro controller. One by one, all emitting diodes are checked. Therefore, a verification of the present status all diodes is realized. Via a serial interface, these data can be processed further.
Area of application
Properties
Serial RS 232C interface. Simple and easy-to-handle connection to SPS or to a PC.
On reception of a demanding signal issued by thecomputer or by the SPS, the receiver emits the number of the blanked emitting diodes ( or interrupted light beams) in binary code (polling). For special purposes, an interface converter for the conversion of RS 485 to RS 232C or Profibus-DP field bus is available.
Voltage: | 24 V DC, +/- 20%, stabilized, max. 200mA |
Connection: | integrated plug-in connector with PG9 als traction relief. alternative: marketable connectors. |
Temperature of operational area: | -10 °C until 55 °C |
Outputs: | PNP, outputs "FREE" and "INTERRUPTED, max. 500mA (short-circuit-safe), RS 485 interface(9600, N,8,1), optional converter to profibus-DP Fied bus/RS 232c |
Protective System: | IP 65 |
Profibusadresse MLPB: | Standard 11 (optionally available with 1-125) |
Aluminium-profile, anodized or plastic laminated RAL yellow 1020, end pieces consists of acid proof plastics (polyamide) reinforced by glass globes. Light emerging and reentry areas made of plexiglass, optional solvent-proof silikate glass windows.
To contact Sensor Measurement about Fiessler Elektronik and Banner Engineering Safety Light Curtains use Get a quote.
Several parallel light beams with a beam spacing of 7,5mm are controlled by a single-chip micro controller. One by one, all emitting diodes are checked. Therefore, a verification of the present status all diodes is realized. Via a serial interface, these data can be processed further.
Area of application
Properties
Serial RS 232C interface. Simple and easy-to-handle connection to SPS or to a PC.
On reception of a demanding signal issued by thecomputer or by the SPS, the receiver emits the number of the blanked emitting diodes ( or interrupted light beams) in binary code (polling). For special purposes, an interface converter for the conversion of RS 485 to RS 232C or Profibus-DP field bus is available.
Voltage: | 24 V DC, +/- 20%, stabilized, max. 200mA |
Connection: | integrated plug-in connector with PG9 als traction relief. alternative: marketable connectors. |
Temperature of operational area: | -10 °C until 55 °C |
Outputs: | PNP, outputs "FREE" and "INTERRUPTED, max. 500mA (short-circuit-safe), RS 485 interface(9600, N,8,1), optional converter to profibus-DP Fied bus/RS 232c |
Protective System: | IP 65 |
Profibusadresse MLPB: | Standard 11 (optionally available with 1-125) |
Aluminium-profile, anodized or plastic laminated RAL yellow 1020, end pieces consists of acid proof plastics (polyamide) reinforced by glass globes. Light emerging and reentry areas made of plexiglass, optional solvent-proof silikate glass windows.
To contact Sensor Measurement about Fiessler Elektronik and Banner Engineering Safety Light Curtains use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product