EXAIR Deep Hole Vac-u-Gun

EXAIR - Deep Hole Vac-u-Gun

A small blow tube removes and lifts the chips while the large suction tube vacuums them away.

A low-cost solution to quickly remove chips and contaminants from grooves, containers and drilled holes.

Compressed air, normally 80-100 PSlG (5.5 – 6.9 BAR), flows through the inlet (1) into an annular plenum chamber (2) when the trigger is depressed. A small amount of air is injected into the blow tube (3) to provide lift for the chips or debris. The larger airflow is injected into the throat of the gun through directed nozzles (4). These jets of air create a vacuum at the intake (5) which draws material in and accelerates it through the unit.

The Deep Hole Vac-u-Gun is ideal for extracting chips/contaminants from grooves, containers and drilled holes where blow guns can create potentially hazardous flying debris. Perfect for holes up to 1-1/4" (32mm) diameter at a depth of 18" (457mm).

Lightweight and easy to use.

In Stock

A low-cost solution to quickly remove chips and contaminants from grooves, containers and drilled holes where blow guns could create potentially hazardous flying debris. Simply position the Deep Hole Vac-u-Gun over the hole and press the trigger. A small blow tube dislodges and lifts the chips while the large suction tube vacuums them away. The operator is protected from flying debris since all contaminants are contained within the clear suction tube.

The Deep Hole Vac-u-Gun uses less compressed air than an ordinary blow gun. It injects a small amount of compressed air through directed nozzles to produce a vacuum on one end and a high output flow on the other. The amplified output flow is 12 times the air consumption rate.

Lightweight and easy to use, the Deep Hole Vac-u-Gun has a durable die-cast construction with no moving parts to wear out. A hanger is provided for easy storage or for mounting on a tool balancer.

The Deep Hole Vac-u-Gun should not be operated without a filter bag or vacuum hose attached to the exhaust. Vacuum tools cannot be used with this product.

Warning : Do not use with combustible dust.

Applications:

Holes in fixtures
Drilled plastics
T-slots – groove cleaning
Coolant evacuation from parts
Woodworking
Bottle cleaning
Container cleaning
Tapped holes
Cupped surfaces
Cavity evacuation
Bottle cleaning
Punch press tables

Advantages:

Low cost
No moving parts – maintenance free
Durable – die cast construction
Eliminates shock hazard – no electricity
Meets OSHA pressure and chip guard requirements
Safe operation – no flying chips
Lightweight and portable
Quiet
Low air consumption

Available from Compressed Air Australia, there are three models within the Deep Hole Vac-u-Gun family and various filters to suit the application.

To contact Compressed Air Australia about EXAIR Deep Hole Vac-u-Gun use Get a quote.

Lightweight and easy to use, the Deep Hole Vac-u-Gun has a durable die-cast construction with no moving parts to wear out. A hanger is provided for easy storage or for mounting on a tool balancer.

The Deep Hole Vac-u-Gun should not be operated without a filter bag or vacuum hose attached to the exhaust. Vacuum tools cannot be used with this product.

Warning : Do not use with combustible dust.

Applications:

Holes in fixtures
Drilled plastics
T-slots – groove cleaning
Coolant evacuation from parts
Woodworking
Bottle cleaning
Container cleaning
Tapped holes
Cupped surfaces
Cavity evacuation
Bottle cleaning
Punch press tables

Advantages:

Low cost
No moving parts – maintenance free
Durable – die cast construction
Eliminates shock hazard – no electricity
Meets OSHA pressure and chip guard requirements
Safe operation – no flying chips
Lightweight and portable
Quiet
Low air consumption

Available from Compressed Air Australia, there are three models within the Deep Hole Vac-u-Gun family and various filters to suit the application.

Read less...

To contact Compressed Air Australia about EXAIR Deep Hole Vac-u-Gun use Get a quote.

EXAIR's Deep-Hole-Vac-u-Gun(0.27MB)

EXAIR Industrial Housekeeping(4.41MB)

Let Compressed Air Australia provide you with a quote

Supplier

Get a quote

Supplier: Compressed Air Australia

Distribution: Australia & Pacific Islands

Location: NT

Customers: Nestle, Rio Tinto, Alcoa, Glencore, CSR

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Compressed Air Australia are also proudly displaying these credentials:

Established:

2004

Employees:

1-5

Customers:

Nestle, Rio Tinto, Alcoa, Glencore, CSR

Certifications:

OSHA, CE

Distribution:

Australia & Pacific Islands

Location:

, NT