Environmental Test Chamber | Thermal Shock Chamber Get latest price

Read more...

To contact Optima Weightech about Environmental Test Chamber | Thermal Shock Chamber use Get a quote.

• Volume : 50L – 1000L
• Internal Dimensions W×H×Dmm : 350*400*350 to 1100*900*1000
• External dimensions W×H×D mm : 1330*2010*1524 to 2050*2250*2400
• High Temperature range : +60 to +200°C
• Temperature Heating Time : Ambient temperature to +200°C within 15 minutes
• Low temperature range : A: –40 to 0°C, B: –55 to 0°C, C: –65 to 0°C
• Test Area Load-bearing Capacity : 30 Kg to 100 Kg

Testing Standards

SONACME thermal shock test chamber complies with various test specifications, including Mil-Std 810, Mil-Std 883, IEC 60068-2-14, JEDEC and various commercial test standards.

The two-zone thermal shock test chamber is very important to the MIL-STD 883 test standard. With Sonacme Technology’s LOW GWP (Global Warming Potential) technology, our test chamber can provide up to 40% energy saving and R-449A refrigerant.

Structural Features

• The inner chamber material is made of SUS#304 stainless steel with 1.2mm thickness. Full welding structure, its sealing is very well and it’s not easy to get cracked.
• The external material is made of cold-rolled plate with 1.5mm thickness, it has gone through brushing, polishing, painting treatment, it’s not easy to get scratched.
• The insulation material is made of polyurethane foam with thicknessof 100mm.
• The door seal adopts double silicon rubber sealing material.
• The observation window is 4 layers of tempered glass, the size you can choose by yourself.
• In addition, in order to prevent frosting on the observation window when running low temperature, we setup a heating wires inside to get it di-frosting.

Refrigeration System

• Compressors equipped with world famous brand such as Tecumseh (France made), Bitzer or GEA BOCK (Germany made).
• Shock absorption and noise reduction process,slow down the vibration, protect the compressor.
• The new pipe bending technology: The bending process can minimize the connector point and make refrigerant flow more efficiently.
• It applies Denmark DANFOSS and Japanese SAGLNOMIYA solenoid valves to improve the overall reliability of the equipment.

MP10 module has motor over-heating protection (with LED indicator), exhaust temperature over-heating protection (requires optional temperature monitoring probe and LED indicator), power indicator, alarm function.

Read less...

To contact Optima Weightech about Environmental Test Chamber | Thermal Shock Chamber use Get a quote.