DC Power Distribution Panel - 1U Rack ...
All models feature either 12 fuse- or breaker-protected outputs (model dependent) with ATO FKS 80 volt rated fuses, or hydraulic/magnetic breakers (breakers sold separately). Dual voltages and polarities can be run simultaneously.
Each independent bus has six outputs rated at up to 25 amps max (at 12/24VDC), or 15 amps max (at 48VDC). Fused models feature LED indicators on the front panel, enabling easy identification and replacement of blown fuses.An integrated security-protected Ethernet communications port (select models) allows the panel to be monitored from a remote site using an industry standard web browser. HTTPS and SNMP V1/V2c protocols are supported. System current, system voltage, individual output currents and breaker status can be monitored, and alarms can be sent to multiple email accounts.
DC outputs can be turned on and off remotely (select models), allowing connected loads to be power-cycled using the Ethernet connection. Automatic load-shedding can be defined to protect critical loads. A network watchdog feature will ping up to two IP addresses and power-cycle loads such as routers which may need rebooting to restore communications with the site.The 1RU design saves valuable rack space, and fits all standard 19 inch racks. Each bus has its own independent Form C alarm contacts.
All models come with a 2 year warranty. Intelligent models are I.P. enabled for remote monitoring and remote shutdown or power cycling of individual outputs, potentially saving unnecessary service call-outs.
Intelligent models also come with five digital input contacts for site monitoring sensors such as door, smoke, and water detection. Each input can be custom labeled to provide descriptive email alerts. All Distribution Series 3 models feature independent Form C outputs to monitor and report alarm conditions for each bus.
The Intelligent models are TCP/IP enabled, and utilize a built-in Ethernet connector with integrated webserver to allow users to remotely monitor load conditions at the panel. System voltage and current, as well as the current reading of each output, can be monitored. This can provide an indication of a problem with the system power, or with individually connected devices such as a radio, repeater, or RF amplifier. Text or email alerts will be sent when an alarm is triggered. Up to 30 days of data logging is provided.
Specifications
Power Specifications | |
Application Voltage (pos or neg ground) | 12, 24, 48VDC |
System Current Rating (peak/cont) | 200A/160A |
Bus Current Rating (peak/cont) | 100A/80A |
Number of Outputs per bus | 6 |
Mechanical | |
Form Factor | 1RU – 19 Inch rack mount with handles |
Dimensions (inches) L x W x H | 9.29 x 19.0 x 1.72 |
Weight (lbs/kg) | 7.0 lbs / 3.2 kg |
Connectors | M8 DC input stud connectors, 10-22AWG cage clamp output terminal blocks |
Environment | |
Operating Temperature Range | -30oC to +60oC |
For a free quote just submit the 'Enquire Now' form or call us.
To contact Helios Power Solutions about DC Power Distribution Panel - 1U Rack Mount 10-60VDC use Get a quote.
All models feature either 12 fuse- or breaker-protected outputs (model dependent) with ATO FKS 80 volt rated fuses, or hydraulic/magnetic breakers (breakers sold separately). Dual voltages and polarities can be run simultaneously.
Each independent bus has six outputs rated at up to 25 amps max (at 12/24VDC), or 15 amps max (at 48VDC). Fused models feature LED indicators on the front panel, enabling easy identification and replacement of blown fuses.An integrated security-protected Ethernet communications port (select models) allows the panel to be monitored from a remote site using an industry standard web browser. HTTPS and SNMP V1/V2c protocols are supported. System current, system voltage, individual output currents and breaker status can be monitored, and alarms can be sent to multiple email accounts.
DC outputs can be turned on and off remotely (select models), allowing connected loads to be power-cycled using the Ethernet connection. Automatic load-shedding can be defined to protect critical loads. A network watchdog feature will ping up to two IP addresses and power-cycle loads such as routers which may need rebooting to restore communications with the site.The 1RU design saves valuable rack space, and fits all standard 19 inch racks. Each bus has its own independent Form C alarm contacts.
All models come with a 2 year warranty. Intelligent models are I.P. enabled for remote monitoring and remote shutdown or power cycling of individual outputs, potentially saving unnecessary service call-outs.
Intelligent models also come with five digital input contacts for site monitoring sensors such as door, smoke, and water detection. Each input can be custom labeled to provide descriptive email alerts. All Distribution Series 3 models feature independent Form C outputs to monitor and report alarm conditions for each bus.
The Intelligent models are TCP/IP enabled, and utilize a built-in Ethernet connector with integrated webserver to allow users to remotely monitor load conditions at the panel. System voltage and current, as well as the current reading of each output, can be monitored. This can provide an indication of a problem with the system power, or with individually connected devices such as a radio, repeater, or RF amplifier. Text or email alerts will be sent when an alarm is triggered. Up to 30 days of data logging is provided.
Specifications
Power Specifications | |
Application Voltage (pos or neg ground) | 12, 24, 48VDC |
System Current Rating (peak/cont) | 200A/160A |
Bus Current Rating (peak/cont) | 100A/80A |
Number of Outputs per bus | 6 |
Mechanical | |
Form Factor | 1RU – 19 Inch rack mount with handles |
Dimensions (inches) L x W x H | 9.29 x 19.0 x 1.72 |
Weight (lbs/kg) | 7.0 lbs / 3.2 kg |
Connectors | M8 DC input stud connectors, 10-22AWG cage clamp output terminal blocks |
Environment | |
Operating Temperature Range | -30oC to +60oC |
For a free quote just submit the 'Enquire Now' form or call us.
To contact Helios Power Solutions about DC Power Distribution Panel - 1U Rack Mount 10-60VDC use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product