"Easy to use. Multiple quotes by most brands on the list. Effective platform indeed - Thank you"
How IndustrySearch works
1. Tell us what you need
in a few quick steps
2. Get personalised quotes
from expert suppliers
3. Compare and make the
best choice
Looking to buy the best Dwyer Pressure Transducer for sale? Get Quotes sends your requirements to expert suppliers in Australia so you get personalised quotes to compare Pressure Transducer prices, specifications, features and terms then choose the one that’s right for you. Also compare servicing, consumables and reviews, so you can buy with confidence.
Dwyer Instruments Australia | Instrumentation and Building Automation Sensors Dwyer Instruments is a leading manufacturer in the controls and instrumentation industry, serving major markets including HVAC, building automation, water chemical, food, oil and gas, and pollution control.
We manufacture instuments for pressure, flow, temperature, level, air velocity, humidity, air quality and more.
Dwyer Instruments Pty Ltd was formed in Australia in ...
What is a pressure transducer and how does it work?
A pressure transducer is a device that converts pressure into an electrical signal. It is a type of sensor that measures the force exerted by a gas or liquid on a surface and converts it into an electrical signal that can be read and analyzed by a computer or other electronic device.
The basic principle behind a pressure transducer is that it uses a diaphragm or other type of sensor to sense the pressure and then converts it into an electrical signal. The diaphragm or sensor is typically made of a material that is sensitive to pressure, such as a piezoelectric crystal or a strain gauge.
When pressure is applied to the diaphragm or sensor, it deforms slightly, and this deformation is measured and converted into an electrical signal. The magnitude of the electrical signal is proportional to the pressure being measured, so the pressure transducer can be used to accurately measure the pressure of gases or liquids in a wide range of applications.
Pressure transducers are used in a variety of industries, including aerospace, automotive, medical devices, and manufacturing. They are essential for monitoring and controlling pressure in these and other applications, helping to ensure safety, reliability, and accuracy.
What are the different types of pressure transducers available in Australia?
A pressure transducer is a device that measures and converts pressure readings into electrical signals for further processing. In Australia, there are several types of pressure transducers available, including:
Strain gauge pressure transducers: These are the most common type of pressure transducers used in industrial applications. They use a strain gauge to measure pressure changes and convert them into electrical signals.
Capacitive pressure transducers: These transducers use a diaphragm with a capacitive element to measure pressure changes. They are highly accurate and can be used in applications where high sensitivity is required.
Piezoelectric pressure transducers: These transducers use a crystal that generates electrical charges when subjected to pressure changes. They are used in applications where high-frequency measurements are required.
Optical pressure transducers: These transducers use optical fibers to measure pressure changes. They are highly accurate and can be used in applications where high sensitivity is required.
Resonant pressure transducers: These transducers use a resonating element to measure pressure changes. They are highly sensitive and can be used in applications where high precision is required.
Vibrating wire pressure transducers: These transducers use a vibrating wire to measure pressure changes. They are highly accurate and can be used in applications where high precision is required.
Overall, the choice of pressure transducer type depends on the specific application requirements, such as accuracy, sensitivity, and frequency range.
What is the accuracy of a pressure transducer and how is it measured?
The accuracy of a pressure transducer refers to how closely it measures the true pressure value. The accuracy of a pressure transducer is typically expressed as a percentage of the full scale range (FSR), which is the maximum pressure the transducer can measure. For example, a 1% FSR accuracy means that the transducer can measure pressure within 1% of the maximum pressure it can measure.
The accuracy of a pressure transducer can be measured by comparing its output to a reference standard, such as a deadweight tester or a calibrated pressure gauge. The transducer is connected to the reference standard, and both devices are exposed to a known pressure value. The output of the transducer is compared to the reference standard, and the difference between the two values is used to calculate the accuracy of the transducer.
Other factors that can affect the accuracy of a pressure transducer include temperature, humidity, and vibration. These factors can cause drift in the transducer's output, which can lead to inaccuracies in pressure measurements. To ensure accurate measurements, it is important to calibrate pressure transducers regularly and to use them within their specified operating conditions.
What is the range of pressure a transducer can measure?
A pressure transducer can measure a wide range of pressures, usually from a few millibars to several hundred bars or even higher. The exact range depends on the specific type and model of the transducer, as well as its calibration and accuracy specifications. Some common pressure ranges for transducers include 0-10 bar, 0-100 bar, 0-1000 bar, and 0-10,000 psi. High-pressure transducers used in industrial applications can measure pressures up to 10,000 or 20,000 psi or more. Low-pressure transducers used in medical or laboratory applications may measure pressures in the range of a few millibars to a few hundred millibars.
What is the output signal of a pressure transducer?
A pressure transducer converts a physical pressure input into an electrical output signal, typically in the form of a voltage or current. The output signal is proportional to the applied pressure and can be used to measure or control pressure in a variety of applications. The output signal can be read by a display or transmitted to a control system for further processing.
What is the lifespan of a pressure transducer?
Lifespan depends on various factors such as the type of application, the quality of the transducer, and the conditions under which it is used. However, on average, a pressure transducer can last for 5-10 years with proper maintenance and care. Some high-quality transducers can last up to 20 years or more. Regular calibration and cleaning can extend the lifespan of a pressure transducer. It is important to replace a transducer if it starts to show signs of wear or if it is no longer accurate.
What is the cost of a pressure transducer?
The cost of a pressure transducer can vary widely depending on several factors such as the type of application, the measurement range, accuracy, and the brand. Generally, the price can range from $50 to $500 or more. Low-cost pressure transducers are usually used for simple applications that require lower accuracy, while high-end transducers are used for more complex applications that require higher accuracy and reliability. It is essential to choose a pressure transducer that meets the specific requirements of the application to ensure accurate and reliable measurements.
How do I choose the right pressure transducer for my application?
Choosing the right pressure transducer for your application involves considering several factors such as the type of pressure being measured, the range of pressure, the accuracy required, the temperature range, and the electrical output signal. It is also important to consider the environment in which the pressure transducer will be operating, as well as any potential hazards such as corrosive or explosive materials. Additionally, it is important to choose a reputable manufacturer and supplier who can provide technical support and assistance with installation and calibration.
What is the installation process for a pressure transducer?
Installation process for a pressure transducer involves the following steps:
Choose the correct location for installation: The transducer should be installed at a position that is representative of the pressure being measured. It should be installed where the pressure is stable and not subjected to vibration or shock.
Prepare the installation site: The installation site should be cleaned and free of any debris before installing the transducer. Any dirt or debris can affect the accuracy of the pressure reading.
Mount the transducer: The transducer should be mounted using the appropriate hardware and ensuring that it is securely fastened. It should be mounted in a way that it is not subjected to any external forces that could damage the sensor.
Connect the electrical wires: The electrical wires should be connected to the transducer following the manufacturer's instructions. The wires should be shielded to prevent any electromagnetic interference.
Calibrate the transducer: The transducer should be calibrated to ensure that it is providing accurate readings. This should be done using a calibrated pressure source and following the manufacturer's instructions.
Test the transducer: The transducer should be tested to ensure that it is functioning correctly. This can be done by applying pressure and verifying that the readings match the expected values.
Monitor the transducer: The transducer should be monitored regularly to ensure that it is still providing accurate readings. Any deviation from the expected values should be investigated and corrected.
What is the warranty and support offered by the manufacturer or supplier of the pressure transducer?
Manufacturers and suppliers typically offer a warranty and support for their products. The specifics of the warranty and support will vary depending on the manufacturer or supplier, as well as the type of pressure transducer being sold.
Warranties may cover defects in materials or workmanship for a certain period of time, such as one year or more. Some manufacturers or suppliers may offer extended warranties for an additional fee. It is important to read the warranty terms and conditions carefully to understand what is covered and what is not covered.
In terms of support, manufacturers and suppliers may offer technical support to help customers with installation, troubleshooting, and other issues. This support may be available over the phone, through email, or via online resources such as manuals and FAQs. Some manufacturers or suppliers may offer training or on-site support for an additional fee.
Overall, it is important to research the warranty and support offered by different manufacturers or suppliers when choosing a pressure transducer. This can help ensure that you have the necessary support and protection in case of any issues with the product.
Get 3+ Quotes Now - Compare prices, availability and quality. It’s free, quick and secure.
Back to top
Pressure Transducer Costs and Supplier Insights
Use Get Quotes to receive personalised prices and proposals from trusted suppliers with top reviews and excellent service.
Buy a Pressure Transducer Near Me
Save time and delivery costs while getting fast support, by contacting Pressure Transducer suppliers near you.