All Position Variable Speed Travel Carriages. ...

All Position Variable Speed Travel Carriages. Gullco “KAT”

Supplier: Weldmart Australia

Gullco “KAT”. All Position Variable Speed Travel Carriages.

Weld-Mart introduces the Gullco "KAT" Automated Welding and Cutting Carriages. These systems offer you the quality and reliability you need to enhance productivity in your operations.

You are guaranteed to find what you need from the trusted leader in welding automation. Avoid the high costs associated with system failure. For quality you can rely on, select Gullco products and systems for your automated welding and cutting operations.

All POSITION VARIABLE SPEED TRAVEL CARRIAGES

Model GK-200-RMC: “KAT” Variable Speed Travel Carriage for RIGID Track.
Heavy-duty self-aligning wheel assemblies, closed loop tack feed-back for curate speed control when running in any plane, regardless of load. (Maximum 45 kg). The carriage is controlled by the Gullco low voltage 24 volt GSP microprocessor pulse width modulation motor control, interfacing with the forward/stop/reverse switch and infinitely variable 4-turn speed potentiometer. The LED display is in IPM or cm/min. The motor control can be upgraded to provide auto forward/reverse, limit switches and auto wire feed start. Speed range: 1.5 – 51.5 IPM (3.9 to 131 cm/min).

Model GK-200-FMC: “KAT” Variable Speed Travel Carriage for FLEXIBLE Track.
V-Type self-aligning wheel assemblies with closed loop tack feed-back for accurate speed control when running in any plane, regardless of load. (Maximum 45 kg). The carriage is controlled by the Gullco low voltage 24 volt GSP microprocessor pulse width modulation motor control, interfacing with the forward/stop/reverse switch and infinitely variable 4-turn speed potentiometer. The LED display is in IPM or cm/min. The motor control can be upgraded to provide auto forward/reverse, limit switches and auto wire feed start. Speed range: 1.5 – 51.5 IPM (3.9 to 131.0 cm/min)

Model GK-189-045-C: “KAT II” Variable Speed Carriage only.
2 – 46 IPM (5 – 114 cm/min) electronic drive with dynamic braking, speed potentiometer, fuse, forward/reverse switch, run/stop power ON light, with top housing drilled and tapped for 1-1/8” (29 mm) “KAT” rack boxes and a 3-hose manifold block. Load capacity 22.68 kg vertical.

HYDRAULIC “KAT” CARRIAGES

Model: GK-190-H-018
For use with rigid aluminium track. Speed 0 to 4.9 IPM. (0 to 12.4 cm/min) Motor complete with quick connect couplings for inlet and outlet hydraulic hoses.

Model: GK-190-H-036
For use with rigid aluminium track. Speed range .5 to 9.8 IPM. (1.25 to 24.89 cm/min) - Motor complete with quick connect couplings for inlet and outlet hydraulic hoses.

Model: GK-190-H-090
For use with rigid aluminium track. Speed range 1 to 26.5 IPM. (2.54 to 67.31 cm/min). Motor complete with quick connect couplings for inlet and outlet hydraulic hoses.

GK-190-H-017
For use with flexible track. Speed range 0 to 7.5 IPM. (0 to 19.05 cm/min). Motor complete with quick connect couplings for inlet and outlet hydraulic hoses.

GK-190-H-035
For use with flexible track. Speed range 1 to 15 IPM. (2.54 to 38.1 cm/min). Motor complete with quick connect couplings for inlet and outlet hydraulic hoses.

GK-190-H-089
For use with flexible track. Speed range 2 to 40.5 IPM. (5.08 to 102.87 cm/min). Motor complete with quick connect couplings for inlet and outlet hydraulic hoses.

TRACK and TRACK MOUNTING DEVICES for "KAT" CARRIAGES

Model GK: Rigid and Flexible Track

We can provide a range of tracks and track mounting devices to suit any application. Please call for details.

REQUEST MORE INFORMATION TODAY!

To contact Weldmart Australia about All Position Variable Speed Travel Carriages. Gullco “KAT” use Get a quote.