| |
|
 pDR Personal Aerosol Monitor
Personal aerosol instrument with benchtop performance. Greater accuracy, increased capabilities, low size and weight. | | |
|
 Flow-Set Polyurethane Foam Sampling System
A complete sampling system for simultaneous collection of particulate and airborne organic vapours. | | |
|
 Continuous Ambient Particulate Monitor - FH62 C14 Beta Annenuation Monitor
Refined Sensitivity - The FH62 C14 Continuous Ambient Particulate Monitor measures the mass concentration of suspended particulate matter (e.g. TSP, PM10, PM2.5, PMC and PM1) by use of beta attenuation. In addition, the ambient radioactive influence of natural Radon gas is measured as a refinement step toward better sensitivity at lower ambient particulate concentrations. |  Series 6100 Computerized Multi-Gas Calibration System
The Environics® Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-theart instrument for dynamic calibration of ambient air analyzers. |  Series 6103 Ozone Transfer Standard
The Environics® Series 6103 Ozone Transfer Standard / Multi-Gas Calibrator is a computer controlled, state-of-the-art instrument for dynamic calibration of ambient air analyzers. |  TEOM 1405-DF Dichotomous Ambient Particulate Monitor with FDMS
ONE SYSTEM, THREEE MEASUREMENTS: PM-10, PM-2.5 AND PM-COARSE.
The TEOM Model 1405-DF Dichotomous Ambient Particulate Monitor with FMDS differentiates itself from other PM measurement methods by utilising a direct mass measurement that is not subject to measurement uncertainties found in surrogate techniques such as beta attenuation, light scattering and pressure drop. The TEOM Model 1405-DF provides the FDMS option to account for the volatile and semi-volatile fraction. |
 High Volume Air Sampler
Lear Siegler Australasia designed and produced the Flowset High Volume Air Sampler for clients that required a high volume air sampler which was quiet, accurate and efficient. |  Partisol-Plus Sequential Air Sampler
The Partisol-Plus Sequential Air Sampler defines the state of the art in flexible, field proven sequential air air sampling. The Partisol-Plus Sequential Air Sampler is a multi-filter sampler (up to 16 filters)that performs automatic exchages according to a user-defined sampling schedule. It has a capacity for two weeks of unattended daily sampling of particulate matter (PM). |
 Thermo Scientifics Newest Line Of 'iSeries' Gas Analysers
2 years Datalogging capacity of 1 minute averages!
Connectivity to Modbus, Ethernet and Internet!
Least Maintenance required of any Analyser on the Market Today!!!
|  5030 Synchroized Hybrid Ambient Real-time Particulate Monitor
The 5030 SHARP Monitor combines light scattering photometry and beta radiation attenuation for continuous PM10/PM2.5 measurement. |
 Model 48i CO Analyser
Gas filter correclation carbon monoxide analyser with enhanced communication capabilities for ambient air and source emissions monitoring. Using gas filter correlation technology, the Model 48i measures the amount of carbon monoxide in the air. |  Model 42i NO-NO2-NOx Analyser
Chemiluminescent gas analyser for nitrogen oxide, nitrogen dioxide and total oxides measurement for ambient air and source emissions monitoring. If required the instrument can be operated continuously in either the NO or NOx modes allowing for response times of less than 5 seconds. |
 Model 49i Ozone Analyser
Using UV Photometric technology, the Model 49i Ozone Analyser measures the amount of ozone in the air from ppb levels up to 200ppm. The Model 49i Ozone Analyser is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. |  Model 48i-HL CO Analyser
Gas filter correlation monoxide analyser with enhanced communication capabilities for ambient air and source emissions monitoring. Using gas filter correclation technology, the Model 48i measures the amount of carbon monoxide in the air. |
 Model 43i SO2 Analyser
Pulsed fluorescence gas analyser with enhanced communication capabilities for ambient air and source emissions monitoring. The Model 43i measures the amount of sulfur dioxide in the air up to 10ppm. |  Model 42i LS Low Source NO-NO2-NOx Analyser
Chemiluminescent gas analyser with enhanced communication capabilities for source emissions monitoring. The Model 42i LS measures the amount of nitrogen oxides in the air from sup-ppm levels up to 100ppm. |
 Model 42i-D NOx Analyser
Chemiluminescent gas analyser with enhanced communicatin capabilities for source emissions monitoring. The Model 42i-D measures the amount of nitrogen oxides in the air from sup-ppb up to 100ppm. |  Model 43i-TLE Enhanced Trace Level SO2 Analyser
Pulsed fluorescence gas analyser with enhanced communication capabilities for trace level ambient air monitoring. The Model 43i-TLE Enhanced Trace Level SO2 Analyser measures the amount of sulfur dioxide in the air down to 50ppt. |
 EnviDAS - Environmental Data Management Systems
Envitech is active in the field of environmental monitoring and data acquisition systems for air, water, toxic gas, radiation and noise applications. |  TEOM 1405-F Continuous Ambient Particulate Monitor with FDMS
The Thermo Scientific TEOM 1405-F is a Continuous Ambient Particulate Monitor with a Filter Dynamic Measurements System. The one-piece system provides total mass measurements by accounting for volatile and non-volatile PM fractions, making it the worldwide standard. |
 MiniVol Tactical Air Sampler (TAS)
The MiniVol Tactical Air Sampler (TAS) delivers precise and accurate results in a lightweight compact device. | Flow-Set Polyurethane Foam Sampling System
A complete sampling system for simultaneous collection of particulate and airborne organic vapours. |
 Continuous Ambient Air Monitor - TEOM 1405
The Thermo Scientif TEOM 1405 is a continuous ambient air monitor that provides unmatched short-term precision and resolution using direct mass measurement. |  Continuous Dichotomous Ambient Air Monitor - TEOM 1405-D
The Thermo Scientific TEOM 1405-D is a continuous dichotomous ambient air monitor. The on-piece system provides three measurements: PM-10, PM-2.5 and PM-Coarse all in one instrument. |
 Model 60i NDIR Multi-Gas Analyser
The Model 60i, full-extractive multi-gas analyser for CO, CO2, NO, NO2, SO2 and O2 monitoring with just one instrument. Non-dispersive infrared (NDIR) Optical Filter Technology delivers accurate, precise measurement of up to six gases. |
| |
|
 MURTAC On-line Automatic Titration
Lear Siegler, in conjunction with Murtac, is delighted to introduce to you their line of On-line Automatic Titration equipment. Murtac has been a leader in their field for more than 2 decades and their On-line Automatic Titration equipment is used for analytical determination of aqueous solutions in the Chemical and Sewage Treatment industries. | Model 70 FTIR Multi-Gas CEMS
Model 70 FTIR Multi-Gas CEMS, a single analyser, continuous monitoring system capable of measuring up to ten gases or more for almost any incineration or co-incineration application. | | |
|
 TEOM Series 4200 Combustion Efficiency Monitor
Directly measures unburned carbon in fly ash, unattended continuous operation, lower fuel consumption and ash generation rates, improved heat rate, optimised mill performance and increased fly ash sales. | | |
|
 Vapour Pressure Process Analyser (RVP-4)
The RVP-4 combines all the advantages of series 4 analysers with a completely new concept, it does not need chilled water which allows a much wider range of sample inlet temperatures. |  Cloud Point Process Analyser
The CPA-4, Cloud Point Analyser (CPA) is an analyser for the fully automatic determination of the Cloud Point (CP) of liquid and transparent oil products. | MURTAC On-line Automatic Titration
Lear Siegler, in conjunction with Murtac, is delighted to introduce to you their line of On-line Automatic Titration equipment. Murtac has been a leader in their field for more than 2 decades and their On-line Automatic Titration equipment is used for analytical determination of aqueous solutions in the Chemical and Sewage Treatment industries. |
| |
|
Cloud Point Process Analyser
The CPA-4, Cloud Point Analyser (CPA) is an analyser for the fully automatic determination of the Cloud Point (CP) of liquid and transparent oil products. | | |
|
 Inline Process Control - Concentration - Colour - Turbidity
Lear Siegler supplies a comprehensive range of process and environmental monitoring instruments. Measure Colour, Concentration, Turbidity, Water/Waste Water, Separator Control, Filtration Monitoring, CIP, Phase Separation, O2, CO2 measurement and more. | | |
|
Inline Process Control - Concentration - Colour - Turbidity
Lear Siegler supplies a comprehensive range of process and environmental monitoring instruments. Measure Colour, Concentration, Turbidity, Water/Waste Water, Separator Control, Filtration Monitoring, CIP, Phase Separation, O2, CO2 measurement and more. |  LiquiSonic Process Analysers
SensoTech is a leading supplier of process analysers for liquids. Monitor and control liquids in intake lines, reactors, flilters, scrubbers, heat exchanges, waste lines, basins and almost anywhere liquid flows. | | |
|
 D-R 290 Dust Concentration & Opacity Monitor
The DURAG D-R 290 Opacity and Dust Concentration Monitoris used for continuous opacity or dust monitoring of flue gas in stacks and ductwork. Fully PS-1 compliant. |  PG-250 Portable Multi-gas Analyser
The PG-250 is a portable stack gas analyser that can simultaneously measure up to five separate gas components using the same proven measurement methods used in Horiba’s line of permanent CEMS. | Thermo Scientifics Newest Line Of 'iSeries' Gas Analysers
2 years Datalogging capacity of 1 minute averages!
Connectivity to Modbus, Ethernet and Internet!
Least Maintenance required of any Analyser on the Market Today!!!
|  5012 Multi Angle Absorption Analyser
The Model 5012 MAAP (Multi Angle Absorption Analyser) is a precision instrument for the measurement of black carbon in the atmosphere. Automatic operation and continuous measurement using a radiative transfer scheme to particle loaded glass fibre filters. |
5030 Synchroized Hybrid Ambient Real-time Particulate Monitor
The 5030 SHARP Monitor combines light scattering photometry and beta radiation attenuation for continuous PM10/PM2.5 measurement. | Model 48i CO Analyser
Gas filter correclation carbon monoxide analyser with enhanced communication capabilities for ambient air and source emissions monitoring. Using gas filter correlation technology, the Model 48i measures the amount of carbon monoxide in the air. |
Model 42i NO-NO2-NOx Analyser
Chemiluminescent gas analyser for nitrogen oxide, nitrogen dioxide and total oxides measurement for ambient air and source emissions monitoring. If required the instrument can be operated continuously in either the NO or NOx modes allowing for response times of less than 5 seconds. | Model 49i Ozone Analyser
Using UV Photometric technology, the Model 49i Ozone Analyser measures the amount of ozone in the air from ppb levels up to 200ppm. The Model 49i Ozone Analyser is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. |
Model 48i-HL CO Analyser
Gas filter correlation monoxide analyser with enhanced communication capabilities for ambient air and source emissions monitoring. Using gas filter correclation technology, the Model 48i measures the amount of carbon monoxide in the air. | Model 43i SO2 Analyser
Pulsed fluorescence gas analyser with enhanced communication capabilities for ambient air and source emissions monitoring. The Model 43i measures the amount of sulfur dioxide in the air up to 10ppm. |
Model 42i LS Low Source NO-NO2-NOx Analyser
Chemiluminescent gas analyser with enhanced communication capabilities for source emissions monitoring. The Model 42i LS measures the amount of nitrogen oxides in the air from sup-ppm levels up to 100ppm. |  Model 80i Mercury Analyser
The Model 80i utilises an advanced cold vapor atomic fluorescence technology. This technology enables the Model 80i to provide continuous sample measurement, with no additional gases or accumulations required - and virtually no interference from SO2. |
Model 42i-D NOx Analyser
Chemiluminescent gas analyser with enhanced communicatin capabilities for source emissions monitoring. The Model 42i-D measures the amount of nitrogen oxides in the air from sup-ppb up to 100ppm. | Model 43i-TLE Enhanced Trace Level SO2 Analyser
Pulsed fluorescence gas analyser with enhanced communication capabilities for trace level ambient air monitoring. The Model 43i-TLE Enhanced Trace Level SO2 Analyser measures the amount of sulfur dioxide in the air down to 50ppt. |
 D-R 800 Dust Monitor
Innovative measuring device with laser technology to monitor small to medium dust emmission according tot he new European regulations. |  D-R 216 Opacity Monitor
The D-R 216 Opacity Monitor is a compact device suitable for smaller plants, heating stations, power stations, boiler plants in industry, barracks, hospitals, schools, dust extraction and filter plants, control of processes in the chemical industry. |
TEOM Series 4200 Combustion Efficiency Monitor
Directly measures unburned carbon in fly ash, unattended continuous operation, lower fuel consumption and ash generation rates, improved heat rate, optimised mill performance and increased fly ash sales. | Continuous Ambient Air Monitor - TEOM 1405
The Thermo Scientif TEOM 1405 is a continuous ambient air monitor that provides unmatched short-term precision and resolution using direct mass measurement. |
Continuous Dichotomous Ambient Air Monitor - TEOM 1405-D
The Thermo Scientific TEOM 1405-D is a continuous dichotomous ambient air monitor. The on-piece system provides three measurements: PM-10, PM-2.5 and PM-Coarse all in one instrument. | Model 60i NDIR Multi-Gas Analyser
The Model 60i, full-extractive multi-gas analyser for CO, CO2, NO, NO2, SO2 and O2 monitoring with just one instrument. Non-dispersive infrared (NDIR) Optical Filter Technology delivers accurate, precise measurement of up to six gases. |
Model 70 FTIR Multi-Gas CEMS
Model 70 FTIR Multi-Gas CEMS, a single analyser, continuous monitoring system capable of measuring up to ten gases or more for almost any incineration or co-incineration application. |
| |
|
LiquiSonic Process Analysers
SensoTech is a leading supplier of process analysers for liquids. Monitor and control liquids in intake lines, reactors, flilters, scrubbers, heat exchanges, waste lines, basins and almost anywhere liquid flows. | | |
|
EnviDAS - Environmental Data Management Systems
Envitech is active in the field of environmental monitoring and data acquisition systems for air, water, toxic gas, radiation and noise applications. | | |
|
Continuous Ambient Particulate Monitor - FH62 C14 Beta Annenuation Monitor
Refined Sensitivity - The FH62 C14 Continuous Ambient Particulate Monitor measures the mass concentration of suspended particulate matter (e.g. TSP, PM10, PM2.5, PMC and PM1) by use of beta attenuation. In addition, the ambient radioactive influence of natural Radon gas is measured as a refinement step toward better sensitivity at lower ambient particulate concentrations. | D-R 290 Dust Concentration & Opacity Monitor
The DURAG D-R 290 Opacity and Dust Concentration Monitoris used for continuous opacity or dust monitoring of flue gas in stacks and ductwork. Fully PS-1 compliant. | TEOM 1405-DF Dichotomous Ambient Particulate Monitor with FDMS
ONE SYSTEM, THREEE MEASUREMENTS: PM-10, PM-2.5 AND PM-COARSE.
The TEOM Model 1405-DF Dichotomous Ambient Particulate Monitor with FMDS differentiates itself from other PM measurement methods by utilising a direct mass measurement that is not subject to measurement uncertainties found in surrogate techniques such as beta attenuation, light scattering and pressure drop. The TEOM Model 1405-DF provides the FDMS option to account for the volatile and semi-volatile fraction. | High Volume Air Sampler
Lear Siegler Australasia designed and produced the Flowset High Volume Air Sampler for clients that required a high volume air sampler which was quiet, accurate and efficient. |
Partisol-Plus Sequential Air Sampler
The Partisol-Plus Sequential Air Sampler defines the state of the art in flexible, field proven sequential air air sampling. The Partisol-Plus Sequential Air Sampler is a multi-filter sampler (up to 16 filters)that performs automatic exchages according to a user-defined sampling schedule. It has a capacity for two weeks of unattended daily sampling of particulate matter (PM). | 5012 Multi Angle Absorption Analyser
The Model 5012 MAAP (Multi Angle Absorption Analyser) is a precision instrument for the measurement of black carbon in the atmosphere. Automatic operation and continuous measurement using a radiative transfer scheme to particle loaded glass fibre filters. |
5030 Synchroized Hybrid Ambient Real-time Particulate Monitor
The 5030 SHARP Monitor combines light scattering photometry and beta radiation attenuation for continuous PM10/PM2.5 measurement. | EnviDAS - Environmental Data Management Systems
Envitech is active in the field of environmental monitoring and data acquisition systems for air, water, toxic gas, radiation and noise applications. |
 D-R 300 Dust Concentration & Soot Meter
The D-R 300 Dust Concentration and Soot Meter is an extremely sensitive device for smoke spot measurement in furnaces designed for ligth fuel oil. | D-R 800 Dust Monitor
Innovative measuring device with laser technology to monitor small to medium dust emmission according tot he new European regulations. |
TEOM 1405-F Continuous Ambient Particulate Monitor with FDMS
The Thermo Scientific TEOM 1405-F is a Continuous Ambient Particulate Monitor with a Filter Dynamic Measurements System. The one-piece system provides total mass measurements by accounting for volatile and non-volatile PM fractions, making it the worldwide standard. | D-R 216 Opacity Monitor
The D-R 216 Opacity Monitor is a compact device suitable for smaller plants, heating stations, power stations, boiler plants in industry, barracks, hospitals, schools, dust extraction and filter plants, control of processes in the chemical industry. |
MiniVol Tactical Air Sampler (TAS)
The MiniVol Tactical Air Sampler (TAS) delivers precise and accurate results in a lightweight compact device. | TEOM Series 4200 Combustion Efficiency Monitor
Directly measures unburned carbon in fly ash, unattended continuous operation, lower fuel consumption and ash generation rates, improved heat rate, optimised mill performance and increased fly ash sales. |
pDR Personal Aerosol Monitor
Personal aerosol instrument with benchtop performance. Greater accuracy, increased capabilities, low size and weight. | Flow-Set Polyurethane Foam Sampling System
A complete sampling system for simultaneous collection of particulate and airborne organic vapours. |
Continuous Ambient Air Monitor - TEOM 1405
The Thermo Scientif TEOM 1405 is a continuous ambient air monitor that provides unmatched short-term precision and resolution using direct mass measurement. | Continuous Dichotomous Ambient Air Monitor - TEOM 1405-D
The Thermo Scientific TEOM 1405-D is a continuous dichotomous ambient air monitor. The on-piece system provides three measurements: PM-10, PM-2.5 and PM-Coarse all in one instrument. |
| |
|
 Portable Infrared Ambient Air Analyser
Used for: Industrial Hygiene Monitoring, Emergency Response Analysis, Indoor Air Quality Studies, Hospital Gas Monitoring, Fume Hood / Tracer Gas Testing and Leak Detection. | | |
|
PG-250 Portable Multi-gas Analyser
The PG-250 is a portable stack gas analyser that can simultaneously measure up to five separate gas components using the same proven measurement methods used in Horiba’s line of permanent CEMS. | D-R 300 Dust Concentration & Soot Meter
The D-R 300 Dust Concentration and Soot Meter is an extremely sensitive device for smoke spot measurement in furnaces designed for ligth fuel oil. | D-R 800 Dust Monitor
Innovative measuring device with laser technology to monitor small to medium dust emmission according tot he new European regulations. | D-R 216 Opacity Monitor
The D-R 216 Opacity Monitor is a compact device suitable for smaller plants, heating stations, power stations, boiler plants in industry, barracks, hospitals, schools, dust extraction and filter plants, control of processes in the chemical industry. |
TEOM Series 4200 Combustion Efficiency Monitor
Directly measures unburned carbon in fly ash, unattended continuous operation, lower fuel consumption and ash generation rates, improved heat rate, optimised mill performance and increased fly ash sales. | Model 60i NDIR Multi-Gas Analyser
The Model 60i, full-extractive multi-gas analyser for CO, CO2, NO, NO2, SO2 and O2 monitoring with just one instrument. Non-dispersive infrared (NDIR) Optical Filter Technology delivers accurate, precise measurement of up to six gases. |
| |
|
 PrevEx Flammability Analyser
The PrevEx Flammability Analyser incorporates several fail-safe features designed to ensure perfect safety under all conditions. | Model 70 FTIR Multi-Gas CEMS
Model 70 FTIR Multi-Gas CEMS, a single analyser, continuous monitoring system capable of measuring up to ten gases or more for almost any incineration or co-incineration application. | | |
|
 Flash Point Process Analyser
The FPA-4 Flash Point Process Analyser establishes ignition specification for fuels -Internal combustion engines -Domestic oil fuels for domestic oil burners (heating oils) for vapourizing burners. | | |
|
Flash Point Process Analyser
The FPA-4 Flash Point Process Analyser establishes ignition specification for fuels -Internal combustion engines -Domestic oil fuels for domestic oil burners (heating oils) for vapourizing burners. | | |
|
 Industrial Hygiene TVA1000B Toxic Vapour Analyser
The Only Portable Intrinsically Safe Dual PID/FID Analyser
The TVA1000B is a benchmark for experience and reliability in Fugitive Emissions Monitoring. | | |
|
 BW Technologies Multi Gas Detectors
GasAlertMicro has set a new benchmark in multi-gas detection.
The ultra-compact and durable GasAlertMicro offers the most advanced features of any confined space gas detector on the market today–at an economical price. | Portable Infrared Ambient Air Analyser
Used for: Industrial Hygiene Monitoring, Emergency Response Analysis, Indoor Air Quality Studies, Hospital Gas Monitoring, Fume Hood / Tracer Gas Testing and Leak Detection. | Industrial Hygiene TVA1000B Toxic Vapour Analyser
The Only Portable Intrinsically Safe Dual PID/FID Analyser
The TVA1000B is a benchmark for experience and reliability in Fugitive Emissions Monitoring. | PG-250 Portable Multi-gas Analyser
The PG-250 is a portable stack gas analyser that can simultaneously measure up to five separate gas components using the same proven measurement methods used in Horiba’s line of permanent CEMS. |
Series 6100 Computerized Multi-Gas Calibration System
The Environics® Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-theart instrument for dynamic calibration of ambient air analyzers. | Series 6103 Ozone Transfer Standard
The Environics® Series 6103 Ozone Transfer Standard / Multi-Gas Calibrator is a computer controlled, state-of-the-art instrument for dynamic calibration of ambient air analyzers. |
Thermo Scientifics Newest Line Of 'iSeries' Gas Analysers
2 years Datalogging capacity of 1 minute averages!
Connectivity to Modbus, Ethernet and Internet!
Least Maintenance required of any Analyser on the Market Today!!!
|  Condumax Hydrocarbon Dewpoint Analyser
The Condumax Hydrocarbon Dewpoint Analyser is specifically designed for on-line measurement of the hydrocarbon condensation temperature of natural gas. Condumax utilises the Dark Spot detection principle. This principle provides the ideal solution if continuous and precise measurement of hydrocarbon condensation temperature in natural gas is required. |
 Cermet II IS
For continous dew point measurements in hazardous area with safe area display, Cermet II IS is the ideal on-line hygrometer solution with full certification by ATEX, FM and CSA. |  Mercury Monitor for Gas AM-4
Recent demand in the fields of geo-chemical gas analysis and disaster prediction have increased, so therefore the demand for equipment that can accurately measure the amount of mercury contained in air or gas within a defined period or can monitor the change in the level of mercury content has increased as well. |
Model 48i CO Analyser
Gas filter correclation carbon monoxide analyser with enhanced communication capabilities for ambient air and source emissions monitoring. Using gas filter correlation technology, the Model 48i measures the amount of carbon monoxide in the air. | Model 42i NO-NO2-NOx Analyser
Chemiluminescent gas analyser for nitrogen oxide, nitrogen dioxide and total oxides measurement for ambient air and source emissions monitoring. If required the instrument can be operated continuously in either the NO or NOx modes allowing for response times of less than 5 seconds. |
Model 48i-HL CO Analyser
Gas filter correlation monoxide analyser with enhanced communication capabilities for ambient air and source emissions monitoring. Using gas filter correclation technology, the Model 48i measures the amount of carbon monoxide in the air. | Model 43i SO2 Analyser
Pulsed fluorescence gas analyser with enhanced communication capabilities for ambient air and source emissions monitoring. The Model 43i measures the amount of sulfur dioxide in the air up to 10ppm. |
Model 42i LS Low Source NO-NO2-NOx Analyser
Chemiluminescent gas analyser with enhanced communication capabilities for source emissions monitoring. The Model 42i LS measures the amount of nitrogen oxides in the air from sup-ppm levels up to 100ppm. | Model 42i-D NOx Analyser
Chemiluminescent gas analyser with enhanced communicatin capabilities for source emissions monitoring. The Model 42i-D measures the amount of nitrogen oxides in the air from sup-ppb up to 100ppm. |
Model 43i-TLE Enhanced Trace Level SO2 Analyser
Pulsed fluorescence gas analyser with enhanced communication capabilities for trace level ambient air monitoring. The Model 43i-TLE Enhanced Trace Level SO2 Analyser measures the amount of sulfur dioxide in the air down to 50ppt. |  DIGOX 5 Trace Oxygen Monitor
Oxygen and CO2 are important parameters influencing taste and keeping the quality of beverages. The prices and almost maintenenace-free measuring instruments made by Dr. Thiedig help you ensure quality and process control. |
 DIGOX 5 CO2 Monitor
Oxygen and CO2 are important parameters influencing taste and keeping the quality of beverages. The precise and almost maintenance-free measuring instruments made by Dr. Thiedig help you ensure quality and process control. |  DIGOX 6 Portable Oxygen Measuring Instrument
Oxygen and CO2 are important parameter influencing taste and keeping the quality of beverages. The precise and almost maintenance-free measuring instruments made by Dr. Thiedig help you ensure quality and process control. |
EnviDAS - Environmental Data Management Systems
Envitech is active in the field of environmental monitoring and data acquisition systems for air, water, toxic gas, radiation and noise applications. |  PFGC - Pneumatic Focusing Gas Chromatography
VOC Technologies has introduced the new technique of Pneumatic Focusing Gas Chromatography (PFGC). PFGC is a new and continuous speciated monitor for Volatile Organic Compounds (VOC's) and Hazardous Air Pollutants (HAP's). The new technology of PFGC satisfies all criteria in a more cost effective manner than other available techniques and instrumentation.
|
PrevEx Flammability Analyser
The PrevEx Flammability Analyser incorporates several fail-safe features designed to ensure perfect safety under all conditions. | Model 60i NDIR Multi-Gas Analyser
The Model 60i, full-extractive multi-gas analyser for CO, CO2, NO, NO2, SO2 and O2 monitoring with just one instrument. Non-dispersive infrared (NDIR) Optical Filter Technology delivers accurate, precise measurement of up to six gases. |
Model 70 FTIR Multi-Gas CEMS
Model 70 FTIR Multi-Gas CEMS, a single analyser, continuous monitoring system capable of measuring up to ten gases or more for almost any incineration or co-incineration application. |
| |
|
Series 6100 Computerized Multi-Gas Calibration System
The Environics® Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-theart instrument for dynamic calibration of ambient air analyzers. |  Series 7000 Zero Air Generator
Series 7000 is a pure air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry,contaminant-free air. | Series 6103 Ozone Transfer Standard
The Environics® Series 6103 Ozone Transfer Standard / Multi-Gas Calibrator is a computer controlled, state-of-the-art instrument for dynamic calibration of ambient air analyzers. |
| |
|
High Volume Air Sampler
Lear Siegler Australasia designed and produced the Flowset High Volume Air Sampler for clients that required a high volume air sampler which was quiet, accurate and efficient. | | |
|
High Volume Air Sampler
Lear Siegler Australasia designed and produced the Flowset High Volume Air Sampler for clients that required a high volume air sampler which was quiet, accurate and efficient. | | |
|
BW Technologies Multi Gas Detectors
GasAlertMicro has set a new benchmark in multi-gas detection.
The ultra-compact and durable GasAlertMicro offers the most advanced features of any confined space gas detector on the market today–at an economical price. | Portable Infrared Ambient Air Analyser
Used for: Industrial Hygiene Monitoring, Emergency Response Analysis, Indoor Air Quality Studies, Hospital Gas Monitoring, Fume Hood / Tracer Gas Testing and Leak Detection. | Industrial Hygiene TVA1000B Toxic Vapour Analyser
The Only Portable Intrinsically Safe Dual PID/FID Analyser
The TVA1000B is a benchmark for experience and reliability in Fugitive Emissions Monitoring. |
| |
|
Portable Infrared Ambient Air Analyser
Used for: Industrial Hygiene Monitoring, Emergency Response Analysis, Indoor Air Quality Studies, Hospital Gas Monitoring, Fume Hood / Tracer Gas Testing and Leak Detection. | Industrial Hygiene TVA1000B Toxic Vapour Analyser
The Only Portable Intrinsically Safe Dual PID/FID Analyser
The TVA1000B is a benchmark for experience and reliability in Fugitive Emissions Monitoring. | PrevEx Flammability Analyser
The PrevEx Flammability Analyser incorporates several fail-safe features designed to ensure perfect safety under all conditions. |
| |
|
BW Technologies Multi Gas Detectors
GasAlertMicro has set a new benchmark in multi-gas detection.
The ultra-compact and durable GasAlertMicro offers the most advanced features of any confined space gas detector on the market today–at an economical price. | Portable Infrared Ambient Air Analyser
Used for: Industrial Hygiene Monitoring, Emergency Response Analysis, Indoor Air Quality Studies, Hospital Gas Monitoring, Fume Hood / Tracer Gas Testing and Leak Detection. | Inline Process Control - Concentration - Colour - Turbidity
Lear Siegler supplies a comprehensive range of process and environmental monitoring instruments. Measure Colour, Concentration, Turbidity, Water/Waste Water, Separator Control, Filtration Monitoring, CIP, Phase Separation, O2, CO2 measurement and more. | Cermet II IS
For continous dew point measurements in hazardous area with safe area display, Cermet II IS is the ideal on-line hygrometer solution with full certification by ATEX, FM and CSA. |
| |
|
 RA3000 - Reducing Vaporisation Mercury Analyser
The RA-3000 reducing vaporisation mercury analyser can provide advanced mercury measurement capabilities for liquids. | Thermo Scientifics Newest Line Of 'iSeries' Gas Analysers
2 years Datalogging capacity of 1 minute averages!
Connectivity to Modbus, Ethernet and Internet!
Least Maintenance required of any Analyser on the Market Today!!!
|  NIC MA-Series Mercury Analyser
The MA-Series Mercury Analyser offers extreme simplicity, remarkable flexibility, and comes in a variety of configurations to fit your application and budget requirements. |  SP-3D Mercury Analyser
The Mercury SP-3D is an automatic mercury analyser. Two steps gold amalgamation method by heating decomposition with ceramic tube and boat is adopted. Any sample( solid, liquid, gas ) can be rapidly analysed with no sample pretreatment procedure and with high sensitivity and precision. |
Mercury Monitor for Gas AM-4
Recent demand in the fields of geo-chemical gas analysis and disaster prediction have increased, so therefore the demand for equipment that can accurately measure the amount of mercury contained in air or gas within a defined period or can monitor the change in the level of mercury content has increased as well. | Model 80i Mercury Analyser
The Model 80i utilises an advanced cold vapor atomic fluorescence technology. This technology enables the Model 80i to provide continuous sample measurement, with no additional gases or accumulations required - and virtually no interference from SO2. |
 EMP-1A Mercury Analyser
The EMP-1A measures mercury vapour concentrations on site and in real-time, is light weight and easy to use. |
| |
|
Inline Process Control - Concentration - Colour - Turbidity
Lear Siegler supplies a comprehensive range of process and environmental monitoring instruments. Measure Colour, Concentration, Turbidity, Water/Waste Water, Separator Control, Filtration Monitoring, CIP, Phase Separation, O2, CO2 measurement and more. | | |
|
 Cermax IS Portable Dewpointmeter
The hygrometer of choice for the measurement of dew-point temperature or moisture content in hazardous area gas applications
|  Easidew Range of Hygrometers
“It’s easy and it measures dew point” Low Cost – Michell’s Easidew range of hygrometers is one of the most affordable on the market. |  Transmet IS Dew Point Transmitter
For continuous dew point measurements in hazardous areas, Transmet IS from Michell Instruments is the ideal transmitter solution with local measurement and certified intrinsically safe design. | Condumax Hydrocarbon Dewpoint Analyser
The Condumax Hydrocarbon Dewpoint Analyser is specifically designed for on-line measurement of the hydrocarbon condensation temperature of natural gas. Condumax utilises the Dark Spot detection principle. This principle provides the ideal solution if continuous and precise measurement of hydrocarbon condensation temperature in natural gas is required. |
Cermet II IS
For continous dew point measurements in hazardous area with safe area display, Cermet II IS is the ideal on-line hygrometer solution with full certification by ATEX, FM and CSA. |
| |
|
Model 60i NDIR Multi-Gas Analyser
The Model 60i, full-extractive multi-gas analyser for CO, CO2, NO, NO2, SO2 and O2 monitoring with just one instrument. Non-dispersive infrared (NDIR) Optical Filter Technology delivers accurate, precise measurement of up to six gases. | Model 70 FTIR Multi-Gas CEMS
Model 70 FTIR Multi-Gas CEMS, a single analyser, continuous monitoring system capable of measuring up to ten gases or more for almost any incineration or co-incineration application. | | |
|
PrevEx Flammability Analyser
The PrevEx Flammability Analyser incorporates several fail-safe features designed to ensure perfect safety under all conditions. | | |
| < |
